Extreme Networks EPICenter 6.0, Reference Manual

Page: 341 / 580

VLAN Properties
EPICenter Reference Guide
341
2 Enter a descriptive name for the protocol. The name must begin with a letter followed by up to 31
characters. See the
ExtremeWare Software User Guide for details on naming.
3 Select a protocol type from the pull-down list in the type column.
4 Type a corresponding four-digit hexadecimal filter value in the value field.
5 Repeat steps 3 and 4 to enter up to six type-value pairs.
6 When you have finished entering the definition, click Add to add the new protocol filter to the
EPICenter database.
NOTE
The protocol filter is now available to be used on any switch, but is not created on any switches at this time. The
protocol filter is created on a switch only when you create a VLAN to use the new protocol filter on that switch.
The database acts as a collective store for network data without needing to replicate it on every switch.
7 Click Close to exit the window.
VLAN Properties
The VLAN Properties window displays the following information:
Click
OK
to close the window.
Name The VLAN name
Tag The VLAN tag value (if any) or “Untagged”
Protocol The protocol filter configured for the VLAN