Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 338 / 580

Using the VLAN Manager

EPICenter Reference Guide

338

Figure 163: The Modify VLAN dialog, IP Forwarding page

Select a switch from the table of switches.

Change the IP address and IP mask as appropriate. Click the

Enable GLOBAL IP Forwarding on

switch...

check box to enable or disable IP forwarding on the switch.

CAUTION

This changes the IP Forwarding behavior for the entire switch, not just for the selected VLAN.

Click

Apply

to implement the changes.

Click

Close

to exit the window.

Modifying a VLAN from the Component Tree Menu

To start the Modify VLAN process for a VLAN in the Component Tree, follow these steps:

Select a VLAN in the Component Tree.

Right-click to display the pop-up menu, and select

Modify VLAN Membership

The Modify Membership of VLAN dialog opens, as shown in

Figure 164

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands