Extreme Networks EPICenter 6.0 Reference Manual Download Page 193 | Manualshive

Page: 193 / 580

background image

Upgrading the Software or BootROM on Your Switches

EPICenter Reference Guide

193

Figure 90: The Multi-step Upgrade step

This page shows you the steps EPICenter has determined are necessary to upgrade the device(s) from
the current image to the image you have selected for download. It also indicates the upgrade that the
Upgrade Wizard will perform during this iteration of the multi-step upgrade.

In the right-hand panel, the wizard provides more details about the set of steps that must be performed
to accomplish the complete upgrade.

NOTE

EPICenter performs only one upgrade at a time; if multiple steps are needed, you must initiate the upgrade process
again after each successful iteration, until the final image has been installed.

To proceed with the upgrade EPICenter has proposed for this step, click

Next>>.

The Operation Selection page of the Upgrade Wizard will appear, with the appropriate options selected
(a device reboot, and a configuration download if this is a software image upgrade).

If you do not want to use the multi-step upgrade procedure and, instead, want to force EPICenter to
perform a single-step upgrade from your current software image version to your desired software
image version, click

Skip Multi-Step Upgrade

. Skipping the multi-step upgrade will upgrade directly

to the specified version.

«
...
191
192
193
194
195
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: NEC Pages: 4

Brand: Garmin Pages: 6

Brand: Xerox Pages: 18

MAIL - BROWSING SMARTPHONE

Brand: Blackberry Pages: 25

DATA SYNCHRONIZER

Brand: Novell Pages: 50

WS02-NCTC1-E - 07-2001

Brand: Omron Pages: 116

Work.Group/Windows 3

Brand: Amanda Pages: 106

MultiSite Configurator

Brand: Altigen Pages: 10

NeatWorks For Mac

Brand: NeatWorks Pages: 33

Brand: Ulead Pages: 168

Brand: Juniper Pages: 24

JUNOS OS 10.3 - SOFTWARE

Brand: Juniper Pages: 3946

DiskRescue 2009

Brand: UNIBLUE Pages: 26

Brand: Genius Pages: 3

Brand: Genius Pages: 2

VIDEOCAM SLIM USB2

Brand: Genius Pages: 4

Brand: Genius Pages: 11

SANsurfer FC HBA Manager Application

Brand: Qlogic Pages: 218

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands