manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Firmware Manager Functions

 

EPICenter Reference Guide

177

●

Select a device in the tree to see status for the individual device (see 

Figure 81

). 

The main area of the window displays information about any modules installed in the device that 
include a version of ExtremeWare or ExtremeXOS. If a device does not contain any modules, or the 
modules do not require an OS, then this area will be empty. 

Stacking Device Support

Stacking devices running ExtremeWare 7.4 or later are handled as if they are slots; selecting the stack 
master in the Component Tree displays the stack members as if they are modules. 

Software Versions

The version number of the software image on the device. 

• If the software on the device matches the version you have designated as the 

standard version for this device type, the column also displays a green check. 

• If the version does not match the standard version, the column displays a red X. 

• If no standard version has been specified, no indicator is shown. See 

“Specifying 

the Current Software Versions” on page 194

 for more information on specifying 

standard versions. 

Obsolete

A red X indicates that this software version is considered “obsolete,” meaning it has 
been superseded by a newer General Availability release. If you have Automatic 
Information Updates enabled, EPICenter checks the Extreme Networks web site once 
every 24 hours for the newest version information. 

BootROM Versions

The version number of the BootROM software

Obsolete

A red X indicates that this BootROM version is considered “obsolete,” meaning it has 
been superseded by a newer General Availability release. 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Aastra Venture IP Telephone System Software Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 10
Altigen Altiware HPBX 5.0A Administration Manual preview
Altiware HPBX 5.0A
Brand: Altigen Pages: 490
Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Brand: Novell Pages: 10
F-SECURE ANTI-VIRUS FOR MIMESWEEPER - Administrator'S Manual preview
ANTI-VIRUS FOR MIMESWEEPER -
Brand: F-SECURE Pages: 44
MacroSystem Digital Video DVD-Arabesk 2 User Manual preview
DVD-Arabesk 2
Brand: MacroSystem Digital Video Pages: 28
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Brand: Alarm Lock Pages: 2
Amazon VBA Manual preview
VBA
Brand: Amazon Pages: 60
deXlan TV Expert User Manual preview
TV Expert
Brand: deXlan Pages: 17
D-Link DS-605 - VPN Client - PC User Manual preview
DS-605 - VPN Client - PC
Brand: D-Link Pages: 15
D-Link DSN-210-SW - SureSync Continuous Data Protection Datasheet preview
DSN-210-SW - SureSync Continuous Data Protection
Brand: D-Link Pages: 4
D-Link D-View 5.1 Quick Installation Manual preview
D-View 5.1
Brand: D-Link Pages: 56
D-Link D-View 6 Professional User Manual preview
D-View 6 Professional
Brand: D-Link Pages: 143
D-Link PS Admin User Manual preview
PS Admin
Brand: D-Link Pages: 136
D-Link D-View 5.1 User Manual preview
D-View 5.1
Brand: D-Link Pages: 279
Ulead VideoStudio 9 User Manual preview
VideoStudio 9
Brand: Ulead Pages: 218
AVG AVGPREP 8.5 - V 85.1 Manual preview
AVGPREP 8.5 - V 85.1
Brand: AVG Pages: 4
BT Voyager Digital Media Player Installation & User Manual preview
Voyager Digital Media Player
Brand: BT Pages: 30
Intel SE72xx User Manual preview
SE72xx
Brand: Intel Pages: 30

Brands by name

Popular brands

Load more brands