Extreme Networks EPICenter 6.0, Reference Manual

Page: 138 / 580

The EPICenter Alarm System
EPICenter Reference Guide
138
The fields and buttons in this window are defined as follows:
The buttons in the middle of the page let you move selected devices, ports, or groups between the
source list and the Selection list:
Synchronizing EPICenter with Device RMON Rules
Source Type The source of the RMON rule targets (Device, Device Group, Port, or Port Group). Select the
type you want from the pull-down list. The choices you have are determined by the variable
you selected for the rule. For example, if the variable you have selected to monitor is applied
per port, you will be able to select by Port or Port Group.
Select Group The device group whose members are displayed in the Device list. This choice is not
available if you have selected Device Group or Port Group as the Source Type.
Device/Device Group/
Port Group The list of components (devices or groups) of the specified type. The field label changes
based on the Source Type. It is labeled Device when you select either Device or Ports (a
second field is provided for port selection if needed).
If you leave your cursor over a device name for a moment, a pop-up displays the IP address
of the device.
IfIndex The list of ports available on the device selected in the Device Source list. This list appears
only if you’ve selected Port as the Source Type. Select a device from the Device list, and the
appropriate set of ports for the device appears.
Selection The devices, ports, device groups, or port groups that are currently targets for the RMON
rule.
Add -> Adds the selected device(s), port(s), device Groups or Port Groups to the Selection list for
inclusion in the scope of this alarm.
Add All -> Adds all the components in the source list to the Selection list.
<- Remove Removes the selected components from the Selection list.
<- Remove All Removes all the components from the Selection list.
1 To synchronize EPICenter’s database with the RMON rules in place on a switch, click the
Sync button at the top of the window.
The Synchronize RMON Rules window opens, as shown in Figure 61 .