manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Using the VLAN Manager

 

EPICenter Reference Guide

334

Deleting a VLAN

Users with Administrator or Manager access can delete VLANs from Extreme Networks switches 
managed by the EPICenter software. If you have only Monitor access, you cannot use this function. 

To delete a VLAN, follow these steps:

1

Click the 

Delete 

button in the VLAN Manager Toolbar. 

The Delete VLAN dialog is displayed, as shown in 

Figure 161

. 

Figure 161: The Delete VLAN page

2

Select the VLAN you want to delete.

3

Click 

Delete

.

The VLAN is deleted from all the switches on which it exists. If any of the switches in the VLAN are 
offline or unreachable, the VLAN cannot be deleted completely, and remains with only those 
switches as members.

4

Click 

Close

 to exit the window. 

NOTE

When you delete a VLAN, it is not immediately removed from the “By VLAN” Component Tree, even though it has 
been deleted from all switches. It can remain in the Component Tree, with no device members, for up to 24 hours 
before EPICenter removes it. You can use the 

Refresh

 command to update the Component Tree and remove any 

VLANs that are no longer exist on any switches. 

Refreshing the Component Tree

When you delete a VLAN, EPICenter removes the VLAN from all switches on which it exists, but may 
not remove the VLAN entry from the VLAN Manager Component Tree for as long as 24 hours. The 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

AMX Modero ViewPoint MVP-5100 Operation/Reference Manual preview
Modero ViewPoint MVP-5100
Brand: AMX Pages: 190
Adobe 65014293 - Photoshop CS4 - Mac Manual preview
65014293 - Photoshop CS4 - Mac
Brand: Adobe Pages: 87
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
Kenwood ARCP-2000 Instruction Manual preview
ARCP-2000
Brand: Kenwood Pages: 21
Kenwood KDC-X8006U Instruction Manual preview
KDC-X8006U
Brand: Kenwood Pages: 40
Kenwood KDC-MP735U Instruction Manual preview
KDC-MP735U
Brand: Kenwood Pages: 52
Kenwood KDC-X891 Instruction Manual preview
KDC-X891
Brand: Kenwood Pages: 68
Primera SureThing User Manual preview
SureThing
Brand: Primera Pages: 48
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.7
Brand: Red Hat Pages: 78
Ulead BURN.NOW 4 User Manual preview
BURN.NOW 4
Brand: Ulead Pages: 58
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
Texas Instruments NoteFolio Software Manual preview
NoteFolio
Brand: Texas Instruments Pages: 37
UNIBLUE DriverScanner 2010 Product Manual preview
DriverScanner 2010
Brand: UNIBLUE Pages: 12
MACROMEDIA FLASH 8-FLASH Use Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 678
Oracle WebLogic JSR-170 Adapter Supported Configurations preview
WebLogic JSR-170 Adapter
Brand: Oracle Pages: 6
Cabletron Systems 7C03 MMAC SmartSWITCH User Manual preview
7C03 MMAC SmartSWITCH
Brand: Cabletron Systems Pages: 150
Palm Treo Pro Supplementary Manual preview
Treo Pro
Brand: Palm Pages: 46
IBM AH0QXML - Lotus Domino Messaging User Manual preview
AH0QXML - Lotus Domino Messaging
Brand: IBM Pages: 120

Brands by name

Popular brands

Load more brands