Extreme Networks EPICenter 6.0 Reference Manual Download Page 367 | Manualshive

Page: 367 / 580

background image

Server Properties Administration

EPICenter Reference Guide

367

Topology Properties

Select Topology from the drop-down menu field at the top of the properties panel to set properties that
affect the collection and display of RMON statistics in the Topology applet.

Host

The host name or IP address of the system to which traps should be forwarded

Port

The port on which the specified host receives traps (by default, port 162)

Community

The community string for the specified host

Trap Conversion

The version of SNMP to which traps should be converted:

• No conversion: Trap will be sent as is.

• Convert trap to SNMPv1

• Convert trap to SNMPv2c

Enable Topology RMON
Statistics Data Collection

A check in this box enables the collection of RMON statistics in the Topology applet.
The default is enabled, which means that RMON statistics will be collected for all
devices that have RMON enabled in the device. To disable the collection of RMON
Statistics, uncheck the checkbox. If this option is disabled, then no RMON statistics
will be displayed on any maps, regardless of the setting of the Display RMON Statistics

Display RMON Statistics in
new Maps by Default

The display of RMON statistics on a map can be enabled or disabled for individual
maps through the RMON Statistics checkbox option in the Topology Map Properties
window for each map. This server property specifies the

default state

of the RMON

statistics display checkbox in the Topology Map Properties window.

A check in this box specifies that by default the RMON Statistics option in the Map
Properties window will be enabled. Thus, by default, RMON statistics will be displayed
for all maps unless they are specifically disabled for an individual map. To disable the
RMON statistics display for an individual map, you can uncheck the RMON Statistics
option in the Map Properties window for that map.

This option is

disabled

by default, meaning that the corresponding option in the Map

Properties is disabled by default.

Note:

If Topology RMON statistics data collection is disabled, then this display option

will have no effect.

«
...
365
366
367
368
369
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: Yamaha Pages: 30

Brand: Acuma Labs Pages: 20

Brand: VeriFone Pages: 25

Brand: Model Technology Pages: 37

TICKETMASTER - LEARN MORE

Brand: Blackberry Pages: 7

FLEX - DEVELOPING COMPONENTS AND THEMES

Brand: MACROMEDIA Pages: 82

Brand: Am Pages: 14

CoPilot CoPilot Live Smartphone

Brand: ALK Pages: 42

NECSAM RICHER APPT FINAL2

Brand: NEC Pages: 1

NECAM NEWSREL 070306

Brand: NEC Pages: 2

Brand: NEC Pages: 3

Brand: NEC Pages: 9

Brand: NEC Pages: 49

Brand: NEC Pages: 56

NEC Storage PathManager 3.1

Brand: NEC Pages: 65

MultiSync FP1375X

Brand: NEC Pages: 64

MultiSync FP955

Brand: NEC Pages: 68

Veritas CommandCentral 5.1

Brand: Symantec Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands