Extreme Networks EPICenter 6.0, Reference Manual

Page: 41 / 580

Right-Click Pop-Up Menus
EPICenter Reference Guide
41
Figure 8: The Upload Device Info wizard
●
To include the most recent uploaded configuration file, click to check the Include Last Uploaded
Configuration option.
●
To extract “show tech” detailed information, click to check the I nclude extended trouble shooting
information option.
By default (when this option is not checked) EPICenter executes show tech commands as follows:
■
For devices running ExtremeWare 7.3 or later, the
show tech-support brief
command is
executed.
■
For devices running ExtremeXOS, the
show tech all
command is executed.
■
For devices running versions of ExtremeWare prior to 7.3, the
show tech-support
command is
executed, and the I nclude extended trouble shooting information option is not available.
When the I nclude extended trouble shooting information option is checked, EPICenter executes the
following commands:
■
For devices running ExtremeWare 7.3 or later, the
show tech-support all
command is executed.
■
For devices running ExtremeXOS, the
show tech all detail
command is executed.
●
You can change the location where this file will be saved. By default, the file name will start with
“TACInfo” and will include the device IP address and timestamp:
TACInfo_< IP
Address >_<T imestamp >.zip
Click Next to execute the command. A second screen displays a progress bar that indicates the progress
of the command.
You can abort the command at any time by clicking the Cancel button.
When the command has finished, a final screen indicates the success or failure of the command
execution.
The Macros Sub-Menu
The Macros command provides a sub-menu of the user-defined Telnet macros that are available to run
on the selected device or on the devices in the selected device group, or on selected ports. If no macros
are defined in the current context, the menu contains only the item <none>.