Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 523 / 580

Network Login/802.1x Display

EPICenter Reference Guide

523

The top table in the display, the

Device profile settings

, shows the QoS Profile settings configured for

the device as a whole. The lower table, the

Port exception QoS Profiles

, appears

only for i-series devices

running ExtremeWare 6.2

or later, and shows the QoS settings for any ports that have had a QoS profile

defined individually for the port.

The information in the QoS Profile display is as follows:

The same columns are shown in the Port exception QoS Profiles table.

Network Login/802.1x Display

The Network Login/802.1x display shows lists the Network Login/802.1x information about each user
connected to the device.

Figure 274

shows the Network Login/802.1x display.

Figure 274: Network Login/802.1x display

Profile

The name of the profile.

Min BW

The minimum bandwidth setting.

Max BW

The maximum bandwidth setting.

Priority

The priority setting (low, lowHi, normal, normalHi, medium, mediumHi, high, highHi, or
deny) of the profile.

Policy

Shows the policies that use this profile on this device.

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands