Extreme Networks EPICenter 6.0, Reference Manual

Page: 500 / 580

Using the Policy Manager
EPICenter Reference Guide
500
Figure 262: Policy Definition page for an existing source port policy
The fields in this dialog box are as follows:
3
To change the policy name, type the new name in the
Name
field.
4
To enable or disable the policy, click the
Enabled
checkbox to add or remove the check mark. The
presence of the check indicates that the policy is in the enabled state.
5
To enter or change the description for this policy, just type the new text into the
Description
field.
6
To change the policy type, click the appropriate
Policy Type
selector.
NOTE
If you change the policy type, the contents of the Policy Traffic fields will change. The current entries in the
traffic resource list(s) are removed, although they will still appear in the Current Policy Endpoints list in the Edit
Policy Endpoints window. However, if they are not valid endpoint types for the new policy type, they will not be
added to the endpoint resource lists, and you will need to select new endpoints for your policy.
Name To change the policy name, type the new name in the Name field.
Enabled To enable or disable the policy, click the Enabled checkbox to add or remove the
check mark. The presence of the check indicates that the policy is in the enabled
state.
Description To enter or change the description for this policy, just type the new text into the
Description field.
Policy Type To change the policy type, click the IP, VLAN, or Source Port Policy Type radio
button.