Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 201 / 580

The Macro Player

EPICenter Reference Guide

201

Figure 94: The Telnet Macro Play view with script

To create a macro for playback to a set of Extreme switches, follow these steps:

In the

Telnet Connections

list, select the switch or set of switches where you want your command

macro to run. The switches need not have a Telnet session already open—the macro play function
will open a connection and log into the switch.

The columns in the Telnet Connections table provide the following information:

Enter a series of ExtremeWare CLI commands into the macro buffer.

Name

The name of the device.

Address

The IP address of the device.

Macro Status

The status of the last macro executed on the device. The status can be one of:

•

Pending

: The macro is intended to run on this switch, but has not yet started. This macro

is used only used when playing macros repeatedly.

•

Playing

: The macro is currently running

•

Stopped

: The macro was stopped before it completed.

•

Complete

: The macro has completed running.

•

Macros Not Supported

: Macros cannot be run on this device (may appear if you select a

non-Extreme device or the Summit Px1 or Summit 24e2T/X devices).

•

Failed

: A failure occurred when the macro was run. This is frequently due to an inability

to connect to the switch.

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands