manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Upgrading the Software or BootROM on Your Switches

 

EPICenter Reference Guide

191

The top portion of the page shows the selected image (device or slot image) or BootROM, the 
destination and reboot options, and whether the configuration file should be downloaded after the 
image upgrade.

The 

Partition to use after reboot

 field shows the partition that will be used upon reboot—this will 

always be the same partition as the destination of the image. For ExtremeWare devices, this will be the 
partition you selected as the image destination. For ExtremeXOS devices, the image always goes to the 
non-current partition. (However, for a modular upgrade, you can specify the location). 

The 

Upgrade on the following devices

 list shows the devices you have selected for upgrade. 

You cannot make changes to these choices on this page, but you can use the 

<<Back

 button to return to 

the previous pages of the wizard to change your selections. 

If the settings are correct, click 

Finish

 to proceed with the upgrade. 

If the images do not require a multi-step upgrade, the upgrade proceeds without any additional 
prompts. A Messages From Server window shows the progress of the upgrade on the selected devices. 
This is the original behavior. When finished, the devices reboot according to the setting of the Reboot 
Options.

Performing a Multi-Step Upgrade

EPICenter allows you to perform a procedure called a multi-step upgrade. Using the multi-step upgrade 
EPICenter automatically determines the appropriate upgrade path for both the device BootROM and 
image. The EPICenter client software compares the desired (destination) image and BootROM versions 
to the existing (source) image and BootROM versions loaded on the switch to determine what 
intermediate steps, if any, are required. 

Only Extreme Networks “

i

-series” switches are evaluated for a multi-step upgrade. Extreme devices that 

are not part of the “

i

-series” can be upgrade only using a single step method.

NOTE

For more information on upgrading your Extreme switch, see the ExtremeWare Release Notes.

Upgrade Logic

The multi-step upgrade feature uses the following logic:

●

If the destination image version is greater than or equal to ExtremeWare version 6.1.9, first check the 
BootROM version. The BootROM version must be at least Boot 7.6, if not, upgrade the BootROM to 
Boot 7.6.

●

If the source software image version is less than ExtremeWare version 6.1.9 and the destination 
image is greater than ExtremeWare version 6.1.9, upgrade the software image version to 
ExtremeWare version 6.1.9.

●

If the source software image version is less than ExtremeWare version 6.2.2 and the destination 
image version is greater than ExtremeWare version 6.2.2, upgrade the device to ExtremeWare version 
6.2.2.

●

If the destination software version is greater than or equal to ExtremeWare version 7.0.0, first check 
the BootROM version. The BootROM version must be at least Boot 7.8, if not, upgrade to Boot 7.8.

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Cisco 2950C-24 - Catalyst Switch - Stackable Datasheet preview
2950C-24 - Catalyst Switch - Stackable
Brand: Cisco Pages: 18
Cisco CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE Administrator'S Manual preview
CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE
Brand: Cisco Pages: 61
Cisco Cisco mds 9124 - fabric switch Datasheet preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 9
Cisco CISCO1811 End User Instructions preview
CISCO1811
Brand: Cisco Pages: 16
Cisco Cisco MDS 9020 - Fabric Switch Configuration Manual preview
Cisco MDS 9020 - Fabric Switch
Brand: Cisco Pages: 22
Cisco Catalyst X6816 Datasheet preview
Catalyst X6816
Brand: Cisco Pages: 13
Cisco Cisco mds 9124 - fabric switch Specifications preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 3
Cisco DCNM Configuration preview
DCNM
Brand: Cisco Pages: 7
Cisco GEM318P User Manual preview
GEM318P
Brand: Cisco Pages: 74
Cisco Craft Works Interface Quick Start Manual preview
Craft Works Interface
Brand: Cisco Pages: 32
Cisco Catalyst Series Switch 2940 Hardware Installation Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 82
Cisco Catalyst Series Switch 2940 Regulatory Compliance And Safety Information Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 28
Cisco 11.0 BT Release Notes preview
11.0 BT
Brand: Cisco Pages: 58
Cisco CCNA NETWORK SIMULATOR Manual preview
CCNA NETWORK SIMULATOR
Brand: Cisco Pages: 88
Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual preview
CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Brand: Cisco Pages: 130
Cisco IP Communicator Administration Manual preview
IP Communicator
Brand: Cisco Pages: 162
Cisco HSI 4.1 User Manual preview
HSI 4.1
Brand: Cisco Pages: 199
Cisco Cisco Unified Queue Manager Servicing And Troubleshooting Manual preview
Cisco Unified Queue Manager
Brand: Cisco Pages: 148

Brands by name

Popular brands

Load more brands