Extreme Networks EPICenter 6.0 Reference Manual Download Page 512 | Manualshive

Page: 512 / 580

background image

The ACL Viewer

EPICenter Reference Guide

512

Figure 267: Traffic patterns generated from IP policies for scoped devices

The display includes the following information:

To view the access list rules related to a specific device, select the device. If the device supports IP and
Security policies (Extreme devices running 5.0x, 6.1 or later), the Access List page displays a comparison
of the “ideal” access list rules (rules generated by the EPICenter Policy Manager based on your policy
definitions) and the rules actually configured on the device, as shown in

Figure 268

.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in precedence order.

Policy

Displays the name of the policy.

Protocol

Indicates the protocol specified for the traffic (UPD, TCP, etc. in the example).

Dest IP

The destination IP address, derived from one of the host specifications.

Dest L4 Port

The L4 port associated with the destination IP address, if a port has been specified. An
asterisk indicates the specification “Any.”

Src IP

The source IP address, derived from one of the host specifications.

Src L4 Port

The L4 port associated with the source IP address, if a port has been specified. An
asterisk indicates the specification “Any.”

Profile

The QoS profile that applies to this traffic flow.

Status

Indicates whether the traffic pattern is unique or if it duplicates another traffic pattern.

If a rule is a duplicate, only one of the duplicate rules is used to configure the device.
The rule used is based on the precedence of the duplicate rules.

«
...
510
511
512
513
514
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: Native Instruments Pages: 14

DEEP FREEZE ENTERPRISE - PATCH MANAGEMENT...

Brand: FARONICS Pages: 23

INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...

Brand: F-SECURE Pages: 414

TextBridge PRO 8.5

Brand: ScanSoft Pages: 243

DEEP FREEZER PROFESSIONAL

Brand: FARONICS Pages: 31

ClearPass Guest 3.9

Brand: Aruba Networks Pages: 518

e-control Database Manager

Brand: Crestron Pages: 94

ALTIRIS 6 INVENTORY SOLUTION

Brand: Symantec Pages: 2

Discover ActiveX

Brand: Teklynx Pages: 165

Brand: Billion Pages: 42

Brand: Emagic Pages: 256

DVD MOVIEFACTORY 3

Brand: Ulead Pages: 78

Brand: Acroprint Pages: 61

Brand: Adaptec Pages: 133

Brand: IBM Pages: 220

LogiCORE IP CAN 3.2

Brand: Xilinx Pages: 28

INSIGHT - TEACHER

Brand: FARONICS Pages: 9

POWER SAVE - REQUIREMENTS GUIDE

Brand: FARONICS Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands