Extreme Networks EPICenter 6.0 Reference Manual Download Page 324 | Manualshive

Page: 324 / 580

background image

Using the VLAN Manager

EPICenter Reference Guide

324

As a result, multiple switches are shown as members of the same VLAN whenever all the above are the
same.

For a more detailed explanation of VLANs, see the

ExtremeWare Software User Guide

.

VLAN Manager Functions

There are multiple ways to invoke the functions provided by the VLAN Manager:

●

Using the menus at the top of the main applet frame

●

Using the function buttons shown directly below the EPICenter menus

●

Using commands from a pop-up menu that appears when you right-click on a device or device
group entry in the Component Tree

For simplicity, most of the instructions in this chapter only specify one method of invoking a function
(usually the function button).

VLAN Manager Function Buttons

The buttons at the top of the main VLAN Manager applet provide the following functions:

These functions can also be accessed through the VLAN menu.

The VLAN Menu

EPICenter provides a set of menus at the top of the main applet frame. Most of these are standard
across all the EPICenter applets, and are described in

“EPICenter Menus” on page 32

.

The VLAN Manager provides an additional menu,

VLAN

, that contains commands unique to the

VLAN Manager. The VLAN menu contains the following items:

Table 37: VLAN Manager Function Buttons

By VLAN

Show all the switches with ports that are members of a specific VLAN.

By Switch

Show the VLANs that have members on a specific switch.

Add

Create VLANs on the switch. If you have Monitor access only, you can not use this
function. See “

Adding a VLAN

”

on page 331

for details on using this feature.

Delete

Delete VLANs on the switch. If you have Monitor access only, you can not use this
function. See “

Deleting a VLAN

”

on page 334

for details on using this feature.

Modify

Modify VLANs on the switch. If you have Monitor access only, you can not use this
function. See “

Modifying a VLAN

”

on page 335

for details on using this feature.

Filters

View, add, and delete protocol filter definitions. If you have Monitor access, you
can view filter definitions, but not add or delete them. See “

Adding and Deleting

Protocol Filters

”

on page 339

for details on using this feature.

Refresh

Refresh the information in the “By VLAN” Component Tree, deleting any VLANs
that are no longer configured on any devices. See

“Refreshing the Component

Tree” on page 334

.

«
...
322
323
324
325
326
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: DAVIS Pages: 20

Brand: EAW Pages: 36

AltiWare OE 4.6

Brand: Altigen Pages: 518

Brand: Lexmark Pages: 3

COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...

Brand: MACROMEDIA Pages: 134

SMROUTERUPDATINGFIRMWARE

Brand: Belkin Pages: 4

Brand: Art & Logic Pages: 2

Brand: Avision Pages: 47

2521131 - Intel Wasp Motherboard

Brand: Intel Pages: 1

Active Management Technology v5.0

Brand: Intel Pages: 143

Brand: AMX Pages: 54

Brand: VERITEQ Pages: 112

DIRECTOR MX-LINGO DICTIONARY

Brand: MACROMEDIA Pages: 756

Android Tablet Software

Brand: PressReader Pages: 4

ANTI-VIRUS 4.5 - FOR MICROSOFT EXCHANGE...

Brand: KAPERSKY Pages: 134

Brand: Xerox Pages: 4

ThinkCentre A52

Brand: Lenovo Pages: 114

IMAGE STUDIO Ver.3.0.0

Brand: Panasonic Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands