Extreme Networks EPICenter 6.0, Reference Manual

Page: 83 / 580

Configuring Default Access Parameters
EPICenter Reference Guide
83
Figure 37: Configure Defaults window, SNMP tab
The fields on the SNMP tab are:
Reset clears the contents of the fields and reset them to their default values.
3 Click Save to save your changes to the EPICenter database.
A message window (shown in Figure 38 ) appears to show you the progress of the Save command.
Figure 38: Message window showing Save progress
SNMP Read Community String The SNMP community string for devices using SNMP version 1. The default is
public .
SNMP Write Community String The SNMP community string for devices using SNMP version 1. The default is
private .
SNMP V3 User Name The principal name used for SNMP V3 authentication and security. The default is
initialmd5 .
SNMP V3 Privacy Protocol Specifies the SNMP V3 privacy protocol. Select either No Privacy or CBC DES
Privacy. The default is
No Privacy .
SNMP V3 Privacy Password If the device is using CBC DES Privacy, enter the privacy password. The default
is no password (an empty string).
SNMP V3 Authentication
Protocol Specifies the SNMP V3 authentication protocol. Select No Authentication, MD5
Authentication, or SHA Authentication. The default is
MD5 Authentication .
SNMP V3 Authentication
Password If the devices is using SNMP V3 Authentication, enter the authentication
password. The default password is
initialmd5 .