Extreme Networks EPICenter 6.0 Reference Manual Download Page 375 | Manualshive

Page: 375 / 580

background image

Accessing EPICenter Reports

EPICenter Reference Guide

375

Network
Summary
Report

• Network Summary Report

Summary status of the network, as well as version
and patch information about the EPICenter server.
Shows status of distributed servers if Gold upgrade
is installed.

Devices

• Device Inventory Report

by Device Group and Device Type

By Device

Device Details

Power Over Ethernet

Power Over Ethernet Details

Wireless Ports

Overview of devices known to EPICenter, by Device
Group. From this report you can access the Device
Details report, and additional subreports such as
PoE information and Wireless port information for
devices that support those features.

• Device Status Report

by Device Group

By Device

Alarm Details

Status of devices by device group. From here you
can access status of individual devices (alarms, not
responding etc.) and can drill down to Alarm
Details

Slots, Stacks
and Ports

• Slot Inventory, by Card Type

Card Summary (by Card or All Cards)

Device Details
Slot Details

Empty Slots Report

Inventory of cards (by type) installed in devices in
the EPICenter database. The Card Summary Report
shows details about cards of a given type. From
there you can view details about the device hosting
the card. The Empty Slots report shows empty slots
by device.

• Stack Inventory

Stack Summary

Device Details
Stack Details

Inventory of stacking devices. From this report you
can access Device Details for the stacking device,
or Stack Details.

• Interface Report

Inventory of all ports on devices in the database

• Unused Port Report

By Device

Summary of inactive ports by device including
location, with subreports (by device) showing length
of inactivity, VLAN membership etc.

VLAN

• VLAN Summary

VLAN Details

Summary of all VLANs with device associations.
VLAN Details subreports show configuration details

• Voice VLAN Summary (Voice over IP

Report)

Voice over IP Details

Summary of voice VLANs with device associations.
Subreport shows phone and egress ports by device

EAPS

• EAPS Summary

Summary of EAPS domains known to EPICenter

• EAPS Log

EAPS-related Trap and Syslog entries for devices
configured for EAPS

Logs

• Alarm

EPICenter alarm log (more information available
through Alarm Log Browser feature)

• Event

EPICenter event log entries

• Syslog

Syslog entries

• Config Mgmt

Log of configuration management actions (config
file uploads/downloads) and results

Table 40: EPICenter Reports

Report
Category

Report Name

Description

«
...
373
374
375
376
377
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

WORKCENTRE C2424

Brand: Xerox Pages: 12

WorkCentre M118

Brand: Xerox Pages: 25

CORPORATE SUITE

Brand: KAPERSKY Pages: 36

Afro-Cuban Percussion

Brand: M-Audio Pages: 5

Brand: Adobe Pages: 323

User Access Control (UAC) in Windows® Vista

Brand: Alarm Lock Pages: 2

ZVSE PARALLEL ACCESS

Brand: IBM Pages: 10

Brand: CAKEWALK Pages: 610

Brand: Adobe Pages: 8

PhaserPrint 2.0

Brand: Tektronix Pages: 2

PowerVideo Plus

Brand: EverFocus Pages: 80

Brand: MINOLTA-QMS Pages: 60

CONTRIBUTE 3 - DEPLOYING AND PUBLISHING SERVER

Brand: MACROMEDIA Pages: 38

FS-8704-14 EtherNet

Brand: FieldServer Pages: 30

6100BD - Phaser Color Laser Printer

Brand: Xerox Pages: 56

Wide Format 6050

Brand: Xerox Pages: 50

40D - EOS 40D DSLR

Brand: Canon Pages: 50

Brand: Patton electronics Pages: 331

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands