Extreme Networks EPICenter 6.0 Reference Manual Download Page 411

Page: 411 / 580

Log Reports

EPICenter Reference Guide

411

Figure 205: Alarm Log (portion)

The log can be saved in csv or xml format, or the entire report can be shown in a new page by clicking
the

show all

link.

NOTE

If the EPICenter database has a large number of alarms, the show all option can take a very long time to complete.

The Alarm Log report displays the following information:

Time

Time the alarm occurred, expressed in the local time zone of the EPICenter server)

Name

Name of the alarm

Severity

Severity level of the alarm

Source

IP address of the device that generated the alarm

Category

Category that the alarm is classified under

Ack’ed

Whether the alarm has been acknowledged (0 is acknowledged, 1 is not acknowledged)

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands