Extreme Networks EPICenter 6.0 Reference Manual Download Page 444 | Manualshive

Page: 444 / 580

background image

EPICenter Reports

EPICenter Reference Guide

444

Figure 229: User to Host Mapping

The report displays the following information:

NOTE

In this version of the Reports software, this report does not display wireless clients.

Printing and Exporting EPICenter Reports

This section explains how to print or export reports.

Printing Reports

Unlike the other EPICenter applets, EPICenter reports can be printed with your browser’s print
function. To print a report, place the cursor in the pane where the report is displayed, and use the
browser’s Print button, or the Print command from the File menu, to initiate the print.

User Name

User name

Host Name

Name of the host mapped to the user

Host IP Address

Primary IP address of the host

«
...
442
443
444
445
446
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: Panasonic Pages: 69

Brand: Barco Pages: 31

Appointment Request Portal

Brand: Amazon Pages: 16

Brand: ROUTE 66 Pages: 28

WS02-NCTC1-E - 07-2001

Brand: Omron Pages: 116

Smart Wireless Navigator

Brand: Emerson Pages: 22

Brand: Emerson Pages: 130

SMROUTERUPDATINGFIRMWARE

Brand: Belkin Pages: 4

Cycos ERGO mrs 5.0

Brand: Cycos Pages: 46

Brand: Arturia Pages: 117

Brand: M-Audio Pages: 15

DEVICE-MAPPER MULTIPATH 4.6

Brand: Red Hat Pages: 42

9 INTERNET SECURITY - REVISED 6-2010

Brand: AVG Pages: 209

Brand: Meade Pages: 62

ANTI-VIRUS - FOR MICROSOFT EXCHANGE

Brand: F-SECURE Pages: 115

SMALL BUSINESS SERVER

Brand: Intel Pages: 79

Brand: Ubiquiti Pages: 38

DIRECTOR MX-LINGO DICTIONARY

Brand: MACROMEDIA Pages: 756

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands