manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Voice over IP Manager

 

EPICenter Reference Guide

552

Figure 279: Voice over IP main page showing VoIP VLANs

The Voice over IP window initially displays the Voice VLANs page. Only VLANs selected for Voice 
over IP are shown in this table. A message at the bottom of the window indicates how many VLANs 
have been configured for Voice over IP. 

If you have selected VLANs to carry VoIP traffic, this page shows a summary of the configuration, 
switch by switch, of every VLAN that has been selected. 

For each switch and VLAN, this table shows the following information:

When the root node is selected in the component tree (Voice over IP VLANs) the display shows all 
VoIP VLANs and their included devices. If you select an individual VLAN in the Component Tree, the 
display shows only the devices that include the selected VLAN. 

The 

Select

 button at the top of this window lets you select VLANs for Voice over IP. 

VLAN

The name of the VLAN. This may appear in the list multiple times if the VLAN is 
configured on more than one switch. 

IP Address

The IP address assigned to the VLAN on the switch. This may be blank if the VLAN 
does not have an IP address assigned (as is the case with the Default VLAN).

Switch

The name of the switch.

QoS Profile

The QoS profile assigned to this VLAN on this switch.

Priority

The priority associated with the QoS profile.

Min Bw

The minimum bandwidth for this QoS profile.

Max Bw

The maximum bandwidth for this QoS profile. 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

NEC NEAX 2000 IVS User Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 81
Yamaha MOTIF RACK ES Supplementary Manual preview
MOTIF RACK ES
Brand: Yamaha Pages: 37
Yamaha S08 Voice Editor Manual preview
S08 Voice Editor
Brand: Yamaha Pages: 26
Yamaha MOTIF RACK Music System Owner'S Manual preview
MOTIF RACK Music System
Brand: Yamaha Pages: 37
Yamaha TOOLS for MY16-mLAN Installation Manual preview
TOOLS for MY16-mLAN
Brand: Yamaha Pages: 50
Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual preview
20032623 - Endpoint Protection Small Business Edition
Brand: Symantec Pages: 351
Omron CX-SUPERVISOR V3 Brochure preview
CX-SUPERVISOR V3
Brand: Omron Pages: 5
Genesys Hosted Provider Edition (HPE) 8.1 Product Availability Announcement preview
Hosted Provider Edition (HPE) 8.1
Brand: Genesys Pages: 5
MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual preview
COLDFUSION 5-ADVANCED ADMINISTRATION
Brand: MACROMEDIA Pages: 372
Hitachi Dynamic Link Manager User Manual preview
Dynamic Link Manager
Brand: Hitachi Pages: 746
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2
Samsung UN40C7000WFXZA Troubleshooting Manual preview
UN40C7000WFXZA
Brand: Samsung Pages: 4
Samsung UN46ES8000FXZA Fast Track Troubleshooting preview
UN46ES8000FXZA
Brand: Samsung Pages: 5
Samsung UN40C7000WF (Spanish) Software Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Samsung UE40C7000WW User Manual preview
UE40C7000WW
Brand: Samsung Pages: 7
Samsung SVM-­S1 Quick Reference Manual preview
SVM-­S1
Brand: Samsung Pages: 8
Samsung SyncMaster T23A750 Service Manual preview
SyncMaster T23A750
Brand: Samsung Pages: 46
Samsung UN40ES6820F Service Manual preview
UN40ES6820F
Brand: Samsung Pages: 85

Brands by name

Popular brands

Load more brands