Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 319 / 580

The Tools Menu

EPICenter Reference Guide

319

Figure 149: Add Links to VLAN Dialog

●

To add the selected link to an existing VLAN, click the

Add links to an existing VLAN

radio button.

■

Select the VLAN from the list.

■

Uncheck the

Add selected links to VLAN as tagged

checkbox to specify that the VLAN should

be added as untagged; check the checkbox to add the link as tagged.

●

To add the selected link to a new VLAN, click the

Add links to a new VLAN

radio button.

The display changes, as shown in

Figure 150

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands