Extreme Networks EPICenter 6.0, Reference Manual

Page: 490 / 580

Using the Policy Manager
EPICenter Reference Guide
490
●
For a Source Port policy: You must specify one or more devices and physical ports as source
endpoints. You can specify them individually or as groups that contain ports.
●
For a VLAN policy: You must specify the VLANs to which the policy should apply. You can
specify VLANs individually or as groups that contain VLAN members.
NOTE
You should not include the Management (Mgmt) or MacVlanDiscover VLANs as policy endpoints. These VLANs
cannot have policies associated with them.
7 To select one or more endpoints for any of the policy types, click the Edit... button that appears
either to the right or below the list of endpoint resources.
●
For a Security policy: Two Edit buttons are provided, one to the right of the Network Resources
list, and one to the right of the Users resource list, as shown in Figure 251 .
●
For an IP policy: Two Edit buttons are provided, one to the right of the Servers resource list, and
one to the right of the Clients resource list, similar to that shown in Figure 251 .
●
For a VLAN or Source Port policy: The Edit button appears at the bottom of the Policy Traffic
area, below the Resource list.
a Click the appropriate Edit... button to display the Edit Policy Endpoints window, as shown in
Figure 253 and Figure 254 . For a more detailed explanation of this window, see “Edit Policy
Endpoints Window” on page 495 .
Figure 253: Edit Policy Endpoints window for the resources of Security policy