Extreme Networks EPICenter 6.0 Reference Manual Download | Manualshive

Page: 98 / 580

background image

The Inventory Manager

EPICenter Reference Guide

98

The Network Clients Tab

The Network Clients tab displays the following information:

The Wireless Tab

If this device supports wireless ports (either direct or remote connect ports, the

Wireless

tab displays

information on the selected wireless port and interfaces. The tab is divided into three subtabs:

Wireless

Ports

,

Physical Wireless Interfaces

, and

Virtual Wireless Interface

s.

Under the

Wireless Ports

tab, the following information is shown for the selected port:

Under the

Physical Wireless Interfaces

tab, the following information is shown for the interfaces on the

selected port:

Port

The port on the device on which the user is logged in.

User Name

The login name of the user.

IP Address

The IP address of the user’s host.

Login Type

The login type, either network login or 802.1x.

MAC Address

The MAC address of the user’s host.

VLAN

The VLAN to which the port belongs.

Port

The port number. If this is a remote connect port (virtual port) the port number will be
preceded by a “v” for example, v.1, v.2 and so on.

State

The state of the wireless port: Disabled, Enabled, Online, or Error

Num. Interfaces

The number of physical interfaces associated with this port.

Location

Location of the port as configured by the administrator

BootROM Version

The BootROM version running on the device connected to this port

S/W Version

The version of the software running on the device connected to this port

Description

A description of the device connected to this port

Product Name

The product name of the device connected to this port

Serial Number

The serial number of the device connected to this port

Country Code

The Country Code associated with the device connected to this port, which determines
country-dependent frequency and other regulatory settings on the wireless port, shared by all
wireless ports on the switch

Antenna Type

The type of antenna on the device connected to this port, e.g. Integrated or detachable

Antenna Location

The physical location of the antenna (Indoor, Outdoor)

Interface

Wireless interface identifier. A remote connect interface is indicated by a “v” preceding the
interface identifier, for example v.1.1.1, v.1.1.2, and so on.

802.11 Mode

Wireless LAN RF mode: 802.11a, 802.11b, or 802.11b/g

RF Channel

Radio frequency channel used by the interface

RF Profile

Radio frequency profile configured for or assigned to this interface. See the section on
configuring RF properties in the

Summit 300-48 Switch Software User Guide

.

«
...
96
97
98
99
100
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: Native Instruments Pages: 74

DRAGON NATURALLYSPEAKING PROFESSIONAL 5

Brand: Dragon Systems Pages: 222

SmartCell ZX Administrator

Brand: Cabletron Systems Pages: 34

CERTIFICATE SYSTEM 8 - DEPLOYMENT

Brand: Red Hat Pages: 132

Brand: Ulead Pages: 58

DEVICE-MAPPER MULTIPATH 5.2

Brand: Red Hat Pages: 44

CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Brand: Red Hat Pages: 78

Brand: Vonamic Pages: 30

Brand: FujiFilm Pages: 55

MOBILE ANTI-VIRUS FOR SERIES 60

Brand: F-SECURE Pages: 90

Brand: Cabletron Systems Pages: 108

ANTI-VIRUS - FOR SUN SOLARIS MAIL SERVER

Brand: KAPERSKY Pages: 254

POWERSUITE 2010 - V1

Brand: UNIBLUE Pages: 13

3561ND - B/W Laser Printer

Brand: Samsung Pages: 30

ThinkCentre Edge 71z

Brand: Lenovo Pages: 182

Brand: Samsung Pages: 13

Brand: Zvork Pages: 28

OPTICFILM 7200I SE

Brand: SilverFast Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands