manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

 

EPICenter Reference Guide

343

13

The ESRP Monitor

This chapter describes how to use the EPICenter ESRP Monitor applet for:

●

Viewing the status of ESRP-enabled VLANs and the ESRP-enabled switches in those VLANs

Overview of the ESRP Monitor

The Extreme Standby Router Protocol (ESRP) is a feature of ExtremeWare that allows multiple switches 
to provide redundant layer 3 routing services, as well as layer 2 redundancy, to users. The ESRP 
Manager displays the status of ESRP-enabled VLANs and the ESRP-enabled switches in those VLANs. 
You can view a summary status for all the ESRP-enabled VLANs being monitored by EPICenter. You 
can also view detailed information for an individual ESRP-enabled VLAN and the switches in those 
VLANs.

ESRP Monitor Functions

The ESRP Monitor feature does not provide any feature-specific menus. The four standard EPICenter 
menus are available (EPICenter, Display, Tools and Help). However, the functions on the Display and 
Tools menus are not available. Right-click pop-up menus are also not available in this feature. 

For information on the standard EPICenter menu functions, see 

“EPICenter Menus” on page 32

. 

NOTE

This chapter does not discuss ESRP functionality in any detail. For more information about ESRP, see the 
ExtremeWare Software User Guide, versions 6.0 or later. 

The VLAN Summary View

To start the ESRP Monitor feature, click the 

ESRP

 button in the EPICenter Navigation Toolbar. The 

ESRP Manager applet appears, initially displaying a summary status of the ESRP-enabled VLANs 
known to EPICenter, as shown in 

Figure 167

. 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
Mitsubishi WiFi-Doc Client for iOS User Manual preview
WiFi-Doc Client for iOS
Brand: Mitsubishi Pages: 10
Qlogic SANbox-8 User Manual preview
SANbox-8
Brand: Qlogic Pages: 180
SSI TROPOS SUPERSEARCH 2.4.0.000 Installation Manual preview
TROPOS SUPERSEARCH 2.4.0.000
Brand: SSI Pages: 8
Ken A Vision Applied Vision 4 Instruction Manual preview
Applied Vision 4
Brand: Ken A Vision Pages: 16
Red Hat DEVICE-MAPPER MULTIPATH 4.6 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 4.6
Brand: Red Hat Pages: 42
Techniques Avancees CODESOFT Sentinel Print Pack User Manual preview
CODESOFT Sentinel Print Pack
Brand: Techniques Avancees Pages: 50
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 174
GRASS VALLEY AURORA PLAYOUT 7 Datasheet preview
AURORA PLAYOUT 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY AURORA EDIT 7 Datasheet preview
AURORA EDIT 7
Brand: GRASS VALLEY Pages: 4
Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual preview
RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE
Brand: Tech Source Pages: 68
F-SECURE POLICY MANAGER 8.0 Administrator'S Manual preview
POLICY MANAGER 8.0
Brand: F-SECURE Pages: 221
Mackie FINAL MIX VST - FOR TRACKTION Manual preview
FINAL MIX VST - FOR TRACKTION
Brand: Mackie Pages: 26
MACROMEDIA CONTRIBUTE 3-DEPLOYING CONTRIBUTE Manual preview
CONTRIBUTE 3-DEPLOYING CONTRIBUTE
Brand: MACROMEDIA Pages: 38
Ulead DVDMovieFactory User Manual preview
DVDMovieFactory
Brand: Ulead Pages: 50
TANDBERG Microsoft Exchange Integration V 11.8 Installation And Usage Manual preview
Microsoft Exchange Integration V 11.8
Brand: TANDBERG Pages: 39
Olympus CAMEDIA Master 4.3/Pro Operating Instructions Manual preview
CAMEDIA Master 4.3/Pro
Brand: Olympus Pages: 22

Brands by name

Popular brands

Load more brands