manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Network Topology Views

 

EPICenter Reference Guide

284

Figure 128: The Topology View

The main components of the EPICenter Topology View are:

View

A unique, named hierarchy of maps, consisting of a root map and submaps, depending 
on the topology of the network. The current view name is displayed in the pull down 
field at the left of the icon bar.

Map

A collection of nodes and links. 

Map Hierarchy Tree 

The top portion of the left-hand panel, where the hierarchy of submaps in the current 
topology view is displayed. The name of the currently displayed map is highlighted. 

Map Alarm Status

The highest level alarm currently unacknowledged among the devices in the current 
map or any of its submaps. Devices and submaps within this map that have alarm 
propagation disabled do not contribute to this status. 

If the alarm icon has an “X” through it, this means alarm propagation has been 
disabled for this map or submap, and will not contribute to the alarm status of the next 
higher-level map.

Current View

Submap node

Links

Map Element Description panel

Text node

Hyper node

Device nodes

Decoration node

Map Hierarchy Tree

Currently selected map

Device alarm status

Map Alarm Status

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Adobe 23101764 - Photoshop CS - PC Manual preview
23101764 - Photoshop CS - PC
Brand: Adobe Pages: 105
Novell SENTINEL 6.1.1.0 - README Manual preview
SENTINEL 6.1.1.0 - README
Brand: Novell Pages: 13
Autodesk AUTOCAR CIVIL 2010 Brochure preview
AUTOCAR CIVIL 2010
Brand: Autodesk Pages: 6
Red Hat JBoss Developer Studio 3.0 User Reference Manual preview
JBoss Developer Studio 3.0
Brand: Red Hat Pages: 78
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Brand: SMART Pages: 20
JVC GZ-MG77 - Camcorder - 2.2 MP Instructions Manual preview
GZ-MG77 - Camcorder - 2.2 MP
Brand: JVC Pages: 72
M-Audio Wayoutware TimewARP 2600 User Manual preview
Wayoutware TimewARP 2600
Brand: M-Audio Pages: 49
FARONICS ANTI-VIRUS Manual preview
ANTI-VIRUS
Brand: FARONICS Pages: 4
FARONICS WINSELECT STANDARD Manual preview
WINSELECT STANDARD
Brand: FARONICS Pages: 36
Allied Telesis AT-9400 User Manual preview
AT-9400
Brand: Allied Telesis Pages: 668
F-SECURE POLICY MANAGER 9.0 Administrator'S Manual preview
POLICY MANAGER 9.0
Brand: F-SECURE Pages: 102
A&D Doctor Pro TM-2430-13 Instruction Manual preview
Doctor Pro TM-2430-13
Brand: A&D Pages: 69
DirekTronik Wireless Pocket USB User Manual preview
Wireless Pocket USB
Brand: DirekTronik Pages: 37
SMC Networks ELITEVIEW Management Manual preview
ELITEVIEW
Brand: SMC Networks Pages: 232
Yamaha FIRESTATION Tutorial preview
FIRESTATION
Brand: Yamaha Pages: 26
Ulead MEDIASTUDIO PRO 6.0 User Manual preview
MEDIASTUDIO PRO 6.0
Brand: Ulead Pages: 360
PRESONUS MEGASTUDIO PRODUCER AUDIO SOFTWARE Datasheet preview
MEGASTUDIO PRODUCER AUDIO SOFTWARE
Brand: PRESONUS Pages: 3
Oki B6100n Administration Manual preview
B6100n
Brand: Oki Pages: 106

Brands by name

Popular brands

Load more brands