manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

The Firmware Manager

 

EPICenter Reference Guide

180

Figure 82: Display Software Images Update window

The columns in this window show the following information:

Change

Whether this image has changed since the last time the software information was 
updated. A green check indicates there is a new version available. A red X indicates 
there have been no changes. When you display image updates for the first time, all 
images are marked as changed. 

Version

The version number of the software.

Type

Whether the image is a version of ExtremeWare device or slot software or a version 
of device or slot BootROM software.

Name

The name of the software build.

Status

The release status of the software: whether the software is a General Availability 
software release or Obsolete (meaning it has been superseded by a newer General 
Availability release). If you have Automatic Information Updates enabled, EPICenter 
checks the Extreme Networks web site once every 24 hours for the newest version 
information. 

Present

Whether this version of software is available on your local system. 

• A red check indicates that the software has not been downloaded from Extreme 

Networks. 

• A green check indicates the software is available on the EPICenter server in on 

of the directories: 

<tftp_root>

\images, 

<tftp_root>

\bootrom, 

<tftp_root>

\SlotImages

, or 

<tftp_root>

\slotBootRom. 

<

tftp_root>

 is the location of your TFTP server; by default this is 

<

EPICenter_install_dir

>\user.war\tftp

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Canon PowerShot A530 Software User'S Manual preview
PowerShot A530
Brand: Canon Pages: 153
Canon PowerShot A420 Software User'S Manual preview
PowerShot A420
Brand: Canon Pages: 132
Canon PowerShot A460 Using Manual preview
PowerShot A460
Brand: Canon Pages: 135
Canon MultiPASS C50 Software User'S Manual preview
MultiPASS C50
Brand: Canon Pages: 198
Canon PowerShot A530 Software Starter Manual preview
PowerShot A530
Brand: Canon Pages: 98
Garmin GPSMAP GPSMAP 196 Getting Started preview
GPSMAP GPSMAP 196
Brand: Garmin Pages: 4
Garmin MapSource Owner'S Manual preview
MapSource
Brand: Garmin Pages: 2
Valcom VIP-102B Configuration Manual preview
VIP-102B
Brand: Valcom Pages: 5
Teklynx Discover ActiveX Programmer'S Manual preview
Discover ActiveX
Brand: Teklynx Pages: 165
FARONICS ANTI-VIRUS Manual preview
ANTI-VIRUS
Brand: FARONICS Pages: 4
FARONICS WINSELECT STANDARD Manual preview
WINSELECT STANDARD
Brand: FARONICS Pages: 36
Mustek 1200 CP User Manual preview
1200 CP
Brand: Mustek Pages: 28
Red Hat CLUSTER SUITE - FOR RHEL 4 Overview preview
CLUSTER SUITE - FOR RHEL 4
Brand: Red Hat Pages: 74
Omron SYSMAC CX-Programmer 9 Operation Manual preview
SYSMAC CX-Programmer 9
Brand: Omron Pages: 232
Ulead DVD MOVIEFACTORY 5 User Manual preview
DVD MOVIEFACTORY 5
Brand: Ulead Pages: 72
SMC Networks ELITEVIEW Management Manual preview
ELITEVIEW
Brand: SMC Networks Pages: 232
Vaisala Veriteq viewLinc 3.6 Administrator'S Manual preview
Veriteq viewLinc 3.6
Brand: Vaisala Pages: 122
TANDBERG MOVI 4.0 - FOR WINDOWS 10-2010 User Manual preview
MOVI 4.0 - FOR WINDOWS 10-2010
Brand: TANDBERG Pages: 19

Brands by name

Popular brands

Load more brands