Extreme Networks EPICenter 6.0 Reference Manual Download Page 372 | Manualshive

Page: 372 / 580

background image

Administering EPICenter

EPICenter Reference Guide

372

This string is a shared key by which the cooperating EPICenter servers recognize each other, and
which they use for secure transmission of server data. The default shared secret is the string

secret

.

NOTE

If you change the secret for one EPICenter server, you must also change it for all of the other servers in the
group.

5

Click

Apply

to have the configuration changes take effect.

Configuring a Server Group Manager

To function as the EPICenter Server Group Manager, the server must have a host name that is
configured through DNS.

To enable this EPICenter server as a server Group Manager, do the following:

1

Click the

Server Group Manager

button in the

Server Group Type

panel at the top of the page.

This enables the fields in the

Server Group Manager

panel.

2

Enter the shared secret in the

Secret

field.

This string is a shared key by which the cooperating EPICenter servers recognize each other, and
which they use for secure transmission of server data. The default shared secret is the string

secret

.

NOTE

If you change the secret in one EPICenter server, you must also change it in all of the other servers in the group.

3

Enter the

Poll Interval

in minutes. This determines the frequency with which the Server Manager

communicates information to the other server members of the EPICenter server group. The default is
10 minutes.

4

Add the other members of the server group to the server list:

a

Click

Add

to open the

Add Server

dialog box.

b

Enter the host name or IP address of the member server in the server field. A server member
does not need to have a DNS-translatable host name.

c

Enter the port used to communicate with the server member. This must match the HTTP port
configured for the member server

d

Click

OK

to add this server to the list, or

Cancel

to cancel the operation.

Servers added to this list must be configured as server group members with this server as the
Server Group Manager.

5

To delete a member server from the list, select the server and click

Delete

.

6

Click

Apply

to have the configuration changes take effect.

«
...
370
371
372
373
374
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

GS110TP - ProSafe Gigabit Smart Switch

Brand: NETGEAR Pages: 2

256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010

Brand: Autodesk Pages: 1638

SANsurfer FC HBA Manager Application

Brand: Qlogic Pages: 218

FLASH 8-USING FLASH

Brand: MACROMEDIA Pages: 678

FLASH MX 2004-DATA

Brand: MACROMEDIA Pages: 20

Parallels Desktop 4.0

Brand: Parallel Pages: 2

010-10844-00 - Mobile XT - GPS Software

Brand: Garmin Pages: 8

Brand: GRASS VALLEY Pages: 2

Brand: Barracuda Networks Pages: 71

Security Protect Manager

Brand: Asus Pages: 14

Catalyst 2955 Series

Brand: Cisco Pages: 12

AJ732A - MDS 9134 Fabric Switch

Brand: Cisco Pages: 792

C85-SIMM-16MB - Upgrade From 8MB

Brand: Cisco Pages: 46

and Connecting Network Assistant

Brand: Cisco Pages: 4

Catalyst 2955 Series

Brand: Cisco Pages: 298

Brand: Cisco Pages: 154

AP775A - Nexus Converged Network Switch 5010

Brand: Cisco Pages: 886

Brand: Cisco Pages: 798

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands