Ceyear 4051 Series, User Manual

Page: 741 / 751

Appendix
Appendix B SCPI Command Index
727
[:SENSe]:FREQuency:TUNE:IMMediate Initiate auto tune
[:SENSe]:FREQuency:STARt <freq> Set the starting
frequency
[:SENSe]:FREQuency:STARt? Query start frequency
[:SENSe]:FREQuency:STOP <freq> Set the stop frequency
[:SENSe]:FREQuency:STOP? Query stop frequency
[:SENSe]:FREQuency:SPAN:BANDwidth[:RESolution]:RATio <integer> Set Span/RBW
[:SENSe]:FREQuency:SPAN:BANDwidth[:RESolution]:RATio? Query Span/RBW
[:SENSe]:FREQuency:SPAN:BANDwidth[:RESolution]:RATio:AUTO OFF|ON|0|1 Set Span/RBW on/off
[:SENSe]:FREQuency:SPAN:BANDwidth[:RESolution]:RATio:AUTO?
Query Span/RBW
[:SENSe]:FREQuency:SPAN <freq> Set frequency span
[:SENSe]:FREQuency:SPAN? Query frequency span
[:SENSe]:FREQuency:SPAN:FULL Set full frequency span
[:SENSe]:FREQuency:SPAN:PREVious Query previous
frequency span setting
[:SENSe]:FREQuency:SYNThesis:[:STATe] OFF|ON|0|1 Set phase noise
optimization on/off
[:SENSe]:FREQuency:SYNThesis:[:STATe]? Query phase noise
optimization on/off
[:SENSe]:FREQuency:SYNThesis:AUTO[:STATe] OFF|ON|0|1 Set phase noise
optimization auto
on/off
[:SENSe]:FREQuency:SYNThesis:AUTO[:STATe]? Query phase noise
optimization
auto
on/off
[:SENSe]:IF:GAIN:AUTO OFF|ON|0|1 Set IF gain auto on/off
[:SENSe]:IF:GAIN:AUTO? Query IF gain auto
on/off
[:SENSe]:IF:GAIN:AUTO:LEVEL 5|0|-5|-10 Set IF auto gain level
[:SENSe]:IF:GAIN:AUTO:LEVEL? Query IF auto gain
level
[:SENSe]:IF:GAIN:SWEPt[:STATe] OFF|ON|0|1 Set sweep IF gain
on/off
[:SENSe]:IF:GAIN:SWEPt[:STATe]? Query sweep IF gain
on/off
[:SENSe]:IF:GAIN:SWEPt:AUTO[:STATe] OFF|ON|0|1 Set sweep IF gain auto
on/off
[:SENSe]:IF:GAIN:SWEPt:AUTO[:STATe]? Query sweep IF gain
auto on/off
[:SENSe]:IF:GAIN:FFT[:STATe] LOW|HIGH Set FFT IF gain on/off
[:SENSe]:IF:GAIN:FFT[:STATe]? Query FFT IF gain
on/off
[:SENSe]:IF:GAIN:FFT:AUTO[:STATe] OFF|ON|0|1 Set FFT IF gain auto
[:SENSe]:IF:GAIN:FFT:AUTO[:STATe]? Query FFT IF gain
auto
[:SENSe]:POWer[:RF]:MW:PATH STD|LNPath Set low noise path
on/off