Ceyear 4051 Series, User Manual

Page: 366 / 751

5 Menu
5.2. Description of menu
352
:MMEM:STOR:STAT 1.sta
:MMEM:STOR:SCR 1.bmp
[Load...]
Files can be called through the two steps below:
A) Firstly, select the file type to be called and press 【 File 】 , [Load Type ▶ ]. Select Call Type. The Call Type
is defaulted as ―Status‖, i.e., saved working status of instrument.
B) Press the [Load…] More to pop up an ―Open‖ dialog for Windows Standard File. Select file call directory
and file name and press Open. Press Cancel to stop File Call.
For details, refer to ―3.4 Data Management‖ of this manual.
Remote Command:
:MMEMory:LOAD:STATe <filename>
Examples:
:MMEM:LOAD:STAT 1.sta
[Save Type ▶ ]
Select the Save Type of instrument files, including Status, Trace (+ Status), Image, I/Q Data (Local) and I/Q
Data (Record). ―Status‖ indicates that the Save Type is the current working status of the instrument; ―Trace (+
Status)‖ indicates that the Save Type is the current measured trace data, including current working status of
instrument; ―Image‖ indicates that the Save Type is current displayed image on the screen; ―I/Q Data (Local)‖
indicates that the I/Q data will be saved under local files; and ―I/Q Data (Record)‖ indicates that the I/Q data
will be saved in recorder. The Save Type is defaulted as ―Status‖.
Attention:
1. ―I/Q Data (Local)‖ is only enabled in I/Q Analysis, Transient Analysis and Pulse Analysis.
2. ―I/Q Data (Record)‖ is only enabled in Transient Analysis and Pulse Analysis.
[Load Type ▶ ]
Select the Call Type of instrument files, including Status, Trace (+ Status), I/Q Data (Local) and I/Q Data
(Record). ―Status‖ indicates that the Call Type is the current saved working status of the instrument; ―Trace (+
Status)‖ indicates that the Call Type is the saved trace data and the working status; ―I/Q Data (Local)‖
indicates that the I/Q data will be called from local folder; and ―I/Q Data (Record)‖ indicates that the I/Q data
will be called from the recorder. The Call Type is defaulted as ―Status‖.
Note: ―I/Q Data (Local)‖ and ―I/Q Data (Record)‖ is only enabled in Transient Analysis and Pulse Analysis.
[Exit]
Exit the software program of the signal/spectrum analyzer and get access to the Windows operation system
interface.
5.2.1.3 Mode
Select the measurement mode of signal/spectrum analyzer. Spectrum Analysis and I/Q Analysis are supported
under standard configuration. After purchase of options and updating license documents, menu item entry will
be provided in this menu.