Ceyear 4051 Series, User Manual

Page: 533 / 751

5 Menu
5.2. Description of menu
519
5.2.6.18 Measurement Control
Pop up the More related to Meas Control, including [Measure Single Cont], [Restart] and [Pause/Resume].
[Measure Continuous ON OFF]
● Menu description: to set continuous measurement OFF or ON. When the [Measure Single Cont]is set as
Cont mode, Cont On mode will be triggered and Cont sweep will be the default measure control method;
when the [Measure Single Cont]is set as Single mode, single sweep will be triggered. Press
【 Sweep
Single 】 to restart sweep when the next trigger signal arrives.
● Key path:
【
Meas Control
】
, [Meas Single Cont On Off] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: Continuous On.
● Remote Command:
:INITiate:CONTinuous OFF|ON|0|1
:INITiate:CONTinuous?
● Examples:
:INIT:CONT OFF
[Restart]
● Menu description: to stop current measurement and restart measurement for the signal/spectrum analyzer.
● Key path: 【 Meas Control 】 , [Restart] on the front panel
● Status saved: not saved in instrument status.
● Remote Command:
:INITiate:REST
[Pause/Resume]
● Menu description: when the signal/spectrum analyzer is in operation, this menu is used for pausing
current measurement; when in Paused status, this menu is used for continuing measurement.
● Key path:
【
Meas Control
】
, [Pause/Resume] on the front panel.
● Status saved: not saved in instrument status.
● Remote Command:
:INITiate:PAUS
:INITiate:RES
5.2.7 Burst Power
5.2.7.1 Frequency
The 【 Frequency 】 key on the front panel is used to set parameters related to frequency of the
signal/spectrum analyzer and its soft menus includes [Center Frequency],
[CF Step Auto Man], [Freq Offset]. See the 【 Frequency 】 menu of the sweep analysis function for more
details.