Ceyear 4051 Series, User Manual

Page: 592 / 751

5 Menu
5.2. Description of menu
578
:CALCulate:SPURious:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MAXimum:NEXT
[Next Pk Right]
● Menu description: to search for the peak to the right of the current test trace marker position.
●
Key path: 【 Peak Search 】 , [Next Pk Right] on the front panel.
●
Status saved: not saved in instrument status.
● Remote Command:
:CALCulate:SPURious:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MAXimum:RIGHt
[Next Pk Left]
●
Menu description: to search for the peak to the left of the current test trace marker position.
● Key path:
【
Peak Search
】
, [Next Pk Left] on the front panel.
● Status saved: not saved in instrument status.
● Remote Command:
:CALCulate:SPURious:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MAXimum:LEFT
[Min Search]
● Menu description: to turn on the Min Search.
●
Key path: 【 Peak Search 】 , [Min Search] on the front panel.
● Remote Command:
:CALCulate:SPURious:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MINimum
5.2.10.17 Meas Setup
Pop up the soft menu related to measurement setting, Including [Average Num On/Off], [Average Mode
Exponential Repeat], [Zero-Span Mode
▶ ], [Report Mode], [Low Noise Path On/Off], [Preselector Bypass],
[RF Gain
▶
], [ADC Dither Auto Man] and [Meas Preset].
[Average Num ON OFF]
● Menu description: to turn on or off Average. When Average Count is ON, the user can specify the
average count required for measurement. The Average Count can be adjusted by number keys, stepping
keys or knob.
● Key path: 【 Meas Setup 】 , [Average Num ON OFF] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: 100/OFF
● Setting range: 1~10000
● Default unit: none
● Remote Command:
[:SENSe]:SPURious:AVERage:COUNt <integer>
[:SENSe]:SPURious:AVERage:COUNt?