Ceyear 4051 Series, User Manual

Page: 640 / 751

6 Remote control
6.2 Programmed Port and Configuration of Instrument
626
Fig. 6.2 LAN Interface Setting
Caution
Ensure that the signal/spectrum analyzer is in proper physical connection via RJ45 LAN cable.
The signal/spectrum analyzer only supports the establishment of one LAN control system and static IP address
setting, and does not support DHCP or access to the host through the DNS and domain name server.
Therefore, it is not required to modify the subnet mask. The subnet mask of the instrument should be set as the
fixed value 255.255.255.0.
6.2.2 GPIB

Establish connection
„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
626

Interface Configuration
„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
626
6.2.2.1 Establish Connection
Connect the 4051 series signal/spectrum analyzer and external controller (computer) to LAN through GPIB cables.
6.2.2.2 Interface Configuration
To set the GPIB interface, press
【
System
】
[Interface Config
▶
] [GPIB Address] to enter the interface shown
in Fig. 6.3; modify the GPIB address in the [Local GPIB address] input box through the number keys of the
front panel.