Ceyear 4051 Series, User Manual

Page: 438 / 751

5 Menu
5.2. Description of menu
424
[Auto Gain Level ▶ ]
●
Menu description: to set the Auto Gain Level. Inc5dBm, 0dBm, -5dBm and -10dBm.
● Key path:
【
Input/Output
】
, [IF Output
▶
], [Auto Gain Level
▶
] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: 0dBm.
● Remote Command:
[:sense]:IF:GAIN:AUTO:LEVEL 5|0|-5|-10
[:sense]:IF:GAIN:AUTO:LEVEL?
●
Examples:
:IF:GAIN:AUTO:LEVEL 5
:IF:GAIN:AUTO:LEVEL?
[Log Detector Output ON OFF]
● Menu description: the logarithmic detector output menu is only available when H08 option is purchased.
The analyzer can be used as a wideband detector for logarithmic detector output to output logarithmic
detector envelop signal of the RF signal to the rear panel.
●
Key path: 【 Input/Output 】 , [More 1/2], [Log Detector Output ON/OFF] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset: OFF.
● Remote Command:
:output:AUX:logvideo OFF|ON|0|1
:output:AUX:logvideo?
● Examples:
:OUTP:AUX:LOGV OFF
:OUTP:AUX:LOGV?
[Ext Mixer…]
● Menu description: the Ext Mixer menu is only available when H40 option is purchased. Press this menu
to pop up the parameter setting dialogs for external mixer test. For details, refer to other related manuals.
● Key path:
【
Input/Output
】
, [More 1/2], [Ext Mixer…] On the front panel.
● Status saved: not saved in instrument status.
5.2.2.13 Marker
Pop up the soft More related to markers, including [Select Marker ▶ ], [Normal ], [Delta], [Fixed], [Off],
[Properties ▶ ], [Marker Table On/Off], [Marker Couple
Markers
On/Off], and [All Markers Off].
[Select Marker
▶
Marker 1]
● Command description: to select among 12 different markers of the analyzer. When a certain marker is
selected, the marker will be indicated in the menu where its type and attribute can be set. Select and