Ceyear 4051 Series, User Manual

Page: 619 / 751

5 Menu
5.2. Description of menu
605
[Rel stop limit Auto Man]
● Menu description: to set relative limit stop value of the current offset. Under auto mode, the instrument
will automatically couple a value same with the set start value; while under auto off mode, users may use
number keys, stepping keys or the knob to set the limit.
●
Key path: 【 Meas Setup 】 , [Offset/Limit ▶ ], [More 1/3 ▶ ], [More 2/3 ▶ ], [Rel Stop Limit Auto Man] on
the front panel.
● Status saved: saved in the instrument status.
●
Factory preset:-30 dB.
●
Setting range: - 200.0dB -50dB
● Default unit: dB.
● Remote Command:
[:SENSe]:SEMask:OFFSet:LIST:STOP:RCARrier <rel_ampl>,...
[:SENSe]:SEMask:OFFSet:LIST:STOP:RCARrier?
[:SENSe]:SEMask:OFFSet:LIST:STOP:RCARrier:COUPle ON|OFF|1|0,...
[:SENSe]:SEMask:OFFSet:LIST:STOP:RCARrier:COUPle?
[Fail Mask
▶
]
● Menu description: to set limit test mark of the current offset, including four following mask tests:
Absolute: to serve as absolute limit line. When measured absolute result exceeds the absolute limit value,
the test failed.
Relative: to serve as relative limit line. and measured relative result exceeds the relative limit value, the
test failed.
Absolute and relative: to serve both as the absolute and relative limit lines. When measured absolute
results exceeds the absolute limit value, and measured relative result exceeds the relative limit value, the
test fails.
Absolute or relative: to serve as the absolute or the relative limit lines. When measured absolute results
exceeds the absolute limit value, or measured relative result exceeds the relative limit value, the test
failed.
● Key path:
【
Meas Setup
】
, [Offset/Limit
▶
], [More 1/3
▶
], [More 2/3
▶
], [Fail Mask
▶
] on the front panel.
● Save: saved in the instrument status.
● Factory preset: Absolute
[:SENSe]:SEMask:OFFSet:LIST:TESTABSolute|AND|OR|RELative,...
[:SENSe]:SEMask:OFFSet:LIST:TEST?
[Ref Type ▶ ]
● Menu description: to set measurement reference type, total power reference, power spectral density
reference and frequency spectrum peak reference.
● Key path:
【
Meas Setup
】
, [More 1/2
▶
], [Ref Type
▶
] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: total power reference