Ceyear 4051 Series, User Manual

Page: 393 / 751

5 Menu
5.2. Description of menu
379
● Status saved: saved in the instrument status.
● Factory preset: Positive.
● Remote Command:
:trigger[:sequence]:external2:slope positive|negative
:trigger[:sequence]:external2:slope?
●
Examples:
:TRIG:EXT2:SLOP POS
:TRIG:EXT2:SLOP?
[RF Burst ▶ ]
●
Menu description: to set the Gate Source as Burst Signal Trigger. The soft More are [Trigger Level],
[Gate Source Polarity Pos Neg].
● Remote Command:
[:sense]:sweep:egate:source rfburst
[:sense]:sweep:egate:source?
● Examples:
:SWE:EGAT:SOUR RFB
:SWE:EGAT:SOUR?
[Trigger level]
●
Menu description: to set the Trigger Level Threshold of the burst signal.
● Key path:
【
Sweep
】
, [Gate
▶
], [Gate Source
▶
], [RF Burst
▶
], [Trigger Level] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: -20dBm.
● Setting range: max.: -270dBm-30dBm. The current settable range is coupled with the current reference
level and scale/division. The maximum is the level represented by the top graticule, and the minimum
value is the level represented by the bottom graticule.
● Default unit: dBm.
●
Remote Command:
:trigger[:sequence]:rfburst:level:absolute <ampl>
:trigger[:sequence]:rfburst:level:absolute?
●
Examples:
:TRIG:RFB:LEV:ABS -20dBm
:TRIG:RFB:LEV:ABS?
[Gate
Slope Pos Neg
]
● Menu description: to set the trigger polarity of the Burst Signal Trigger.
● Key path: 【 Sweep 】 , [Gate ▶ ], [Gate Source ▶ ], [RF Burst ▶ ], [Gate
Slope Pos Neg
] on the front panel.