Ceyear 4051 Series, User Manual

Page: 50 / 751

3 Introduction to Use
3.3 Basic measurement methods
36
3.2.2.14 Broadband reconstructed IF/video signal output
Option, to realize any IF, AM/FM or I/Q signal output through digital reconstruction with bandwidth limit of
50 MHz-100MHz.
3.2.2.15 Reconstructed IF/video signal output
Option, to realize any IF, AM/FM or I/Q signal output through digital reconstruction with bandwidth upper
limit of 40 MHz.
3.3 Basic measurement methods
This section describes basic settings and measurement methods of the 4051 Series Signal/Spectrum Analyzer,
including:

Basic operation instructions „„„„„„„„„„„„„„„„„„„„„„„„„„„„„
36
 Basic operation examples
„„„„„„„„„„„„„„„„„„„„„„„„„„„„„„
41
3.3.1 Basic operation instructions
This section gives an overall introduction of how to use the 4051 Series Signal/Spectrum Analyzer (including
graphic area display information type), how to use the 4051 Series Signal/Spectrum Analyzer via keys on the
front panel and other interactive operations and how to use online help.
3.3.1.1 Display area information
Fig. 3.16 shows a measurement interface of the instrument in spectrum analysis mode. Each information zone
is marked with description of the operating interface as shown in Table 3.9. A detailed description will be
given below. Display interfaces of other application modes or functions may vary slightly.
Fig. 3.16 Display interface of the 4051 analyzer
Table 3.9 Description of operating interface