Ceyear 4051 Series, User Manual

Page: 530 / 751

5 Menu
5.2. Description of menu
516
This key has no soft menu.
5.2.6.16 Peak
This key has no soft menu.
5.2.6.17 Measurement Setting
Pop up the soft menu related to measurement setting, including [Meas Counts], [Meas Cycle], [Meas Time],
[Low Noise Path On Off], [Preselector Preselecting Bypass], [RF Gain
▶ ], [ADC Dither Auto Man], [Meas
Preset].
[Meas Counts]
● Menu description: to set the accumulated counts of sampling points of the data. Use number keys,
stepping keys or knob to set the Measurement Count.
● Key path: 【 Meas Setup 】 , [Meas Counts] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: 100kpt
● Setting range: 1000 - 8.389E+6
● Default unit: pt
● Remote Command:
[:SENSe]:PSTatistic:COUNts <integer> [:SENSe]:PSTatistic:COUNts?
[Meas Cycle]
● Menu description: to set the number of measurement cycles corresponding to the accumulated point
count. This value is dependent on settings of the Measure Bandwidth, Measurement Time and
Measurement Count. Use number keys, stepping keys or knob to set the Measurement Cycle.
●
Key path: 【 Meas Setup 】 , [Meas Cycles] on the front panel.
●
Status saved: saved in the instrument status.
● Factory preset: 80
●
Setting range: dependent on settings of the Measure Bandwidth, Measurement Time and Measurement
Count.
● Default unit: none
● Remote Command:
[:SENSe]:PSTatistic:SWEep:CYCLes <integer> [:SENSe]:PSTatistic:SWEep:CYCLes?
[Meas time]
●
Menu description: to specify the time for measurements. The minimum value is 1 us and the maximum
value depends on Measure Bandwidth setting. Use number keys, stepping keys or knob to set the
Measuring Time.
● Key path:
【
Meas Setup
】
, [Measure Time] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: 1.0ms