Ceyear 4051 Series, User Manual

Page: 417 / 751

5 Menu
5.2. Description of menu
403
The math rule is used for specifying the data type of two traces under processing, including logarithmic power,
linear voltage (current) or linear power. For details, refer to ―4.1.3.1 Trace Detector and Trace Math‖.
●
Key path: 【 Trace 】 , [More 1/2 ▶ ], [Math ▶ ] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset: Trace Operation Off.
● Remote Command:
:calculate:MATH:MODE <linear|logarithmic|power>
:calculate:MATH
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6,pdifference|PSUM|loffset|ldifference|O
FF,TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6,TRACE1|TRACE2|TRACE3|TRACE4|TRAC
E5|TRACE6,<real>,<real>
:calculate:MATH? TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6
● Examples:
:CALC:MATH:MODE LIN
:CALC:MATH TRACE1,PDIF,TRACE2,TRACE1,0.0,0.0
:CALC:MATH? TRACE1
[Copy ▶ ]
● Menu description: to copy the data for the selected trace to the other trace. The soft More include:
[Operator 1->Operator 2], [Operand1
▶
], [Operand2
▶
].
Note that Copy Trace is only an operation rather than parameter setting; therefore, it is only performed once
and not for every sweep and measurement. For details, refer to ―4.1.3.1 Trace Detector and Trace Math‖.
●
Key path: 【 Trace 】 , [More 1/2 ▶ ], [Copy ▶ ] on the front panel.
●
Status saved: not saved in instrument status.
● Remote Command:
:trace:COPY
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6,TRACE1|TRACE2|TRACE3|TRACE4
|TRACE5|TRACE6
:trace:COPY?
● Examples:
:TRAC:COPY TRACE1,TRACE2
:TRAC:COPY?
[Clear All Traces]
●
Menu description: to recover all current traces back to the default status, including trace processing
method, display method and detector type.
Note that Reset All Traces is only an operation rather than parameter setting; therefore, it is only performed
once and not for every sweep and measurement.
● Key path:
【
Trace
】
, [More 1/2
▶
], [Clear All Traces] on the front panel.
● Status saved: not saved in instrument status.