Ceyear 4051 Series, User Manual

Page: 596 / 751

5 Menu
5.2. Description of menu
582
●
Key path: 【 Meas Setup 】 , [Range Table ▶ ], [More 1/3 ▶ ], [Abs Start Limit] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset:-50dBm
● Setting range:-200dBm – 50dBm
●
Default unit: dBm.
● Remote Command:
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA[:STARt] <ampl>,...
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA[:STARt]?
[Abs Stop Limit Auto Man]
● Menu description: to set limit stop value. Spurious information above the limit value will be recorded in
the result report based on currently set peak offset and peak threshold. If measured spurious amplitude is
above the start limit value, such amplitude will be added with a red F in the end. Under auto mode, the
instrument will automatically couple a value same with the set start value; while under auto off mode,
users may use number keys, stepping keys or the knob to set the limit.
● Key path:
【
Meas Setup
】
, [Range Table
▶
], [More 1/3
▶
], [Abs Stop Limit] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset:-50dBm
● Setting range:-200dBm – 50dBm
● Default unit: dBm.
●
Remote Command:
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA:STOP <ampl>,...
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA:STOP?
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA:STOP:AUTO OFF|ON|0|1,...
:CALCulate:SPURious[:RANGe][:LIST]:LIMit:ABSolute[:UPPer]:DATA:STOP:AUTO?
[Pk Excursion]
● Menu description: to set the minimum amplitude change of the signal at peak point. For example, if the
peak excursion is 6 dB, it means that points more than 6 dB higher or lower than the peak threshold will
be considered as peak points. Users may use number keys, stepping keys or the knob to set.
●
Key path: 【 Meas Setup 】 , [Range Table ▶ ], [More 1/3 ▶ ], [Pk Excursion] on the front panel.
●
Status saved: saved in the instrument status.
● Factory preset:6 dB.
● Setting range: 0.0dB - 100.0dB
● Default unit: dB.
● Remote Command:
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:EXCursion <rel_ampl>,...
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:EXCursion?