Ceyear 4051 Series, User Manual

Page: 413 / 751

5 Menu
5.2. Description of menu
399
●
Key path: 【 Trace 】 , [Min Hold] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset: after all traces are selected, the trace mode is defaulted as Refresh.
● Remote Command:
:trace<1|2|3|4|5|6>:TYPE minhold
:trace<1|2|3|4|5|6>:TYPE?
● Examples:
:TRAC1:TYPE MIN
:TRAC1:TYPE?
[View/Blank
▶
Refresh Display]
● More description: to set the display method for the selected trace from [Trace On], [View],
[Background] and [Blank].
●
Key path: 【 Trace 】 , [View/Blank ▶ ] on the front panel.
●
Status saved: saved in the instrument status.
● Factory preset: Except Trace 1, after selection of other traces, the trace display is defaulted as Display
OFF.
● Remote Command:
:trace<1|2|3|4|5|6>:display[:state] ON|OFF|0|1
:trace<1|2|3|4|5|6>:display[:state]?
● Examples:
:TRAC1:DISP ON
:TRAC1:DISP?
●
Other descriptions: ―Refresh Display‖ indicates that a new trace will execute refresh in the internal part
of application (backstage) and will be displayed on the display area of the front panel. When the trace
[View/Blank] is set as ―View‖, the signal/spectrum will keep the most recent trace and do not go through
trace processing. The latest trace will be displayed in the display area of the front panel. ―Backstage
Refresh‖ indicates that a new trace will execute refresh in the internal part of application (backstage) and
but will not be displayed on the display area of the front panel. This type is commonly applied in remote
control. ―Display OFF‖ indicates that the signal/spectrum analyzer neither goes through backstage trace
processing nor display. That means, the trace is not activated and is OFF.
[Detector ▶ ]
Pop up soft More related to setting the detector type for the currently selected trace, including [Auto],
[Normal], [Peak], [Sample], [Negative Peak], [Trace Average
▶
], where, the average detector type includes
Log-Pwr Avg, Log-Pwr Avg and Voltage Avg.
[Auto]
● Menu description: to set the detector command for the currently selected trace as Auto. That means, the
signal/spectrum analyzer will automatically select most suitable detector based on the parameter setting