Ceyear 4051 Series, User Manual

Page: 738 / 751

Appendix
Appendix B SCPI Command Index
724
control)
:FORMat:BORDer NORMal|SWAPped Set data byte sequence
(only
for remote
control)
:FORMat:BORDer? Query data byte
sequence (only for
remote control)
:HCOPy[:IMMediate] Output the screen
snapshooting on
printer.
:INITiate:CONTinuous OFF|ON|0|1 Set continuous on/off
:INITiate:CONTinuous? Query continuous
on/off
:INITiate:SANalyzer Spectrum Analysis
Initialize
:INITiate[:IMMediate] Refresh now
:INITiate:PAUS Measurement pause
:INITiate:RES Restart measurement
:INITiate:RESTart Restart Measurement
:INPut:COUPling AC|DC Set coupling method
:INPut:COUPling? Query coupling
method
INPut:FILTer:YIG[:STATe] OFF|ON|0|1 Set preselector bypass
on/off
INPut:FILTer:YIG[:STATe]? Query preselector
bypass on/off
:MEASure:SANalyzer[n]? Make spectrum
measurement as default
:MMEMory:DATA? <file_name> Return the file data
:MMEMory:LOAD:STATe <filename> Call the state file
:MMEMory:STORe:SCReen <filename> Save the state file
:MMEMory:STORe:STATe <filename> Save the screen image
:MMEMory:STORe:TRACe:DATA
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6|ALL<filename > Set trace data store
:MMEMory:LOAD:TRACe:DATA
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6<filename> Trace call
:MMEMory:LOAD:CORRection 1|2|3|4|5|6, <filename> Call amplitude
correction
:MMEMory:STORe:CORRection 1|2|3|4|5|6, <filename> Save amplitude
correction
:OUTPut:AUX SIF|AIF| OFF Set HIF and IF output
on/off
:OUTPut:AUX? Query HI-IF and IF
Output On/Off
:OUTPut:AUX:AIF <value> Set IF output frequency
:OUTPut:AUX:AIF? Query IF output
frequency