Ceyear 4051 Series, User Manual

Page: 418 / 751

5 Menu
5.2. Description of menu
404
●
Remote Command:
:trace:preset:ALL
●
Examples:
:TRAC:PRES:ALL
5.2.2.8 Measurement Setting
Pop up the soft menu related to measurement setting, Include [Average Num], [Average Type Auto Man],
[Limit
▶ ],[PhNoise Opt], [Low Noise Path On Off], [Preselector Presel Bypass], [RF Gain ▶ ], [ADC Dither
Auto Man].
[Average Num]
●
Menu description: to define the average count for trace averaging. This function is only active when the
Average is selected in the
【
Trace
】
menu.
●
Key path: 【 Meas Setup 】 [Average Num] on the front panel.
●
Status saved: saved in the instrument status.
● Factory preset: 10.
●
Setting range: 1-10000.
● Remote Command:
[:sense]:average:count <integer> [:sense]:average:count? [:sense]:average:clear
● Examples:
:AVER:COUN 100
:AVER:COUN?
:AVER:CL
[Average Type
▶
Auto Man]
● Menu description: to set the trace average type. The soft More include [Auto], [Log-Pwr Avg], [Pwr
Avg], [Voltage Avg].
● Key path:
【
Meas Setup
】
, [Average Type Auto Man] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: Auto.
● Remote Command:
[:sense]:average:TYPE RMS|LOG|scalar
[:sense]:average:TYPE?
● Examples:
:AVER:TYPE RMS
:AVER:TYPE?
[Log-Pwr Avg]
●
Menu description: to set the trace average type as Video Average.