Ceyear 4051 Series, User Manual

Page: 620 / 751

5 Menu
5.2. Description of menu
606
[Total Power Ref]
● Menu description: to use carrier power as reference for calculating relative power value of the offset
when selecting total power reference.
●
Key path: 【 Meas Setup 】 , [More 1/2 ▶ ], [Ref Type ▶ ], [Total Power Ref] on the front panel.
[PSD Ref]
●
Menu description: to use carrier power spectral density as reference for calculating relative power value
of the offset when selecting power spectral density reference.
● Key path:
【
Meas Setup
】
, [More 1/2
▶
], [Ref Type
▶
], [PSD Ref] on the front panel.
[Frequency Spectrum Peak Reference]
● Menu description: to use frequency spectrum peak power as reference for calculating relative power
value of the offset when selecting frequency spectrum peak reference.
● Key path:
【
Meas Setup
】
, [More 1/2
▶
], [Ref Type
▶
], [Freq Spectrum Peak Ref] on the front panel.
[Total Power Ref Auto Man]
● Menu description: to set a reference value corresponding to the reference type of the menu when
selecting total power reference as measurement type. Under auto mode, the reference value will be the
power spectral density of the current main channel; while under auto off mode, users may use number
keys, stepping keys or the knob to set the reference value.
● Key path: 【 Meas Setup 】 , [More 1/2 ▶ ], [Ref Type ▶ ], [Total Power Ref Auto Man] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset: 0dBm
● Setting range: -200dBm – 200dBm
● Default unit: dBm.
● Remote Command:
[:SENSe]:SEMask:CARRier[:POWer] <real> [:SENSe]:SEMask:CARRier[:POWer]?
[:SENSe]:SEMask:CARRier:AUTO[:STATe] OFF|ON|1|0 [:SENSe]:SEMask:CARRier:AUTO[:STATe]?
[PSD Ref Auto Man]
● Menu description: to set a reference value corresponding to the reference type of the menu when
selecting spectral density reference as measurement type. Under auto mode, the reference value will be
the power spectral density of the current main channel; while under auto off mode, users may use number
keys, stepping keys or the knob to set the reference value.
● Key path:
【
Meas Setup
】
, [More 1/2
▶
], [Ref Type
▶
], [PSD Ref Auto Man] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: 0 dBm/Hz.
● Setting range: -200 dBm/Hz ~200 dBm/Hz
● Default unit: dBm/Hz