Ceyear 4051 Series, User Manual

Page: 61 / 751

3 Introduction to Use
3.4 Data management
47
Step 2. call reset state:

Firstly, press 【 System 】 key on the front panel.

Press [PowerOn/Preset] soft menu.

Press \[Reset Fac/User] to select reset switch.
If the factory state is required, set the reset switch as Factory; if the measurement state previously
saved by users is required, set the reset switch as User.
 Press 【 Preset 】 key on the front panel to call the reset state.
3.4.1.2 User state saving/calling
The 4051 Series Signal/Spectrum Analyzer provides instrument measurement state (data) saving and calling
functions to help users restore required measurement state for repeated observation and analysis as well as
saving of required measurement data for further analysis.
1) Save instrument state
Step 1. set file save type:
 Press
【
File
】
key on the front panel.
 Press [Save Type] soft menu.
 Press [State] soft menu to change current save type as ―State‖.
Step 2. save file:
 Press [Save...] Soft menu. As shown in Fig. 3.23.
Pop up Save As dialog to select the path and the file name to be saved and then click Save.
Fig. 3.23 File saving interface