Ceyear 4051 Series, User Manual

Page: 64 / 751

3 Introduction to Use
3.4 Data management
50
Fig. 3.25 File saving interface
2) File calling method
Operating procedures:
Step 1. set file call type:

Press 【 File 】 key on the front panel.
 Press [Load Type] soft menu to select file type.
If it is required to call measurement state file, press [State] soft menu to change current call type
as ―State‖. If it is required to call trace data, change the call type to ―Trace (+ state)‖; at such time,
call the trace data in the file to current trace and change current trace display mode to ―Static
Status Display‖.
Step 2. Load file:
 Press [Load...] Key to pop up Open File dialog, select the file named to be called and click Call as
shown in Fig. 3.26.