Ceyear 4051 Series, User Manual

Page: 545 / 751

5 Menu
5.2. Description of menu
531
● Menu description: to turn off the selected marker.
● Key path: 【 Marker 】 , [Off] on the front panel.
●
Status saved: saved in the instrument status.
● Remote Command:
:CALCulate:TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MODE OFF
:CALCulate:TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:MODE?
[Properties
▶
]
Pop up the corresponding More of currently selected marker attribute setup, including [Ref Marker
▶
], [X Axis
Auto Man],
[Marker Trace
▶
] and [Marker Display Line On/Off].
[Ref Marker
▶
]
● Menu description: to select reference marker for current marker. It can be any one from 11 markers
except the currently selected marker.
●
Key path: 【 Marker 】 , [Properties ▶ ], [Ref Marker ▶ ] on the front panel.
●
Status saved: saved in the instrument status.
● Remote Command:
:CALCulate:TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:REFerence <integer>
:CALCulate:TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:REFerence?
[Marker Display Line
▶
]
ON OFF]
● Menu description: to set whether the current marker is displayed as a line on the screen, which is easy to
observe.
● Key path:
【
Marker
】
, [Properties
▶
] and [Marker Display Line On/Off] on the front panel.
● Status saved: saved in the instrument status.
●
Factory preset: OFF.
● Remote Command:
:CALCulate: TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:LINes[:STATe] OFF|ON|0|1
:CALCulate: TXPower:MARKer[1|2|3|4|5|6|7|8|9|10|11|12]:LINes[:STATe]?
[Marker Couple
ON OFF]
●
Menu description: to turn on or off Marker Couple. When it is ON, moving any marker horizontal axis
position will cause an equal movement of horizontal axis position of every other marker which is ON.
When the marker is moved to less than Start Frequency or larger than Stop Frequency, the marker is
limited to the value of the Start Frequency or the Stop Frequency; when the span is zero, the minimum
value is limited as 0, and the maximum value is limited as the Sweep Time.