Ceyear 4051 Series, User Manual

Page: 508 / 751

5 Menu
5.2. Description of menu
494
[Display Config ▶ ]
It is used for configurations of interface language, status area display on interface. The soft menus include
[Select Language
中文
English], [Graticule Display ON OFF], Status Area Display ON OFF], [Frequency
Information Display ON OFF]. See [Display Config
▶
] under
【
Display
】
of the sweep analysis function for
more details.
[Bar Graph ON OFF]
Menu description: to turn on or off Bar Graph Display.
•Key path: 【 Display 】 on the front panel.
Status saved: saved in the instrument status.
• Factory preset: ON
•Remote Command:
:display:acpower:VIEW:window:bgraph ON|OFF|1|0
:display:acpower:VIEW:window:bgraph?
5.2.5.12 Input Output
See the
【
Input/Output
】
menu of the sweep analysis function for more details.
5.2.5.13 Marker
Pop up the soft More related to markers, including [Select Marker
▶
], [Normal], [Marker Delta], [Fixed], [Off],
[Properties ▶ ], [Marker Couple On Off], and [All Markers Off].
[Select Marker
▶
Marker 1]
● Command description: to select among 12 different markers of the analyzer. When a certain marker is
selected, the marker will be indicated in the menu where its type and attribute can be set. Select and
trigger another marker and place it at the center of the current trace. Users can read amplitude and
frequency information (when the frequency span is 0 Hz, time information will be displayed) at the
marker display area at the top right corner of the screen.
●
Key path: Marker], [Select Marker ▶ ] on the front panel.
●
Status saved: saved in the instrument status.
● Factory preset: Marker 1.
[Normal]
●
Menu description: to set the selected marker as the Normal Marker.
● Key path:
【
Marker
】
, [Normal] on the front panel.
● Status saved: saved in the instrument status.
● Remote Command:
:calculate:acpower:marker[1|2|3|4|5|6|7|8|9|10|11|12]:MODE position
:calculate:acpower:marker[1|2|3|4|5|6|7|8|9|10|11|12]:MODE?