Ceyear 4051 Series, User Manual

Page: 532 / 751

5 Menu
5.2. Description of menu
518
[Auto]
● Menu description: to set the RF Gain distribution algorithm to Auto. In this case, the RF Gain distribution
is ―Best Dynamic Range‖.
●
Key path: 【 Meas Setup 】 , [More 1/2], [RF Gain ▶ ], [Auto] on the front panel.
●
Status saved: saved in the instrument status.
[Best for Dynamic Range]
●
Menu description: to set the RF Gain distribution algorithm to Best Dynamic Range. In this case, the RF
Gain is switched to ―Auto OFF‖
● Key path:
【
Meas Setup
】
, [More 1/2], [RF Gain
▶
], [Best Dynamic Range] on the front panel.
● Status saved: saved in the instrument status.
[Best for Sensitivity]
● Menu description: to set the RF Gain distribution algorithm to Best Sensitivity. In this case, the RF Gain
is switched to ―Auto OFF‖
●
Key path: 【 Meas Setup 】 , [More 1/2], [RF Gain ▶ ], [Best for Sensitivity] on the front panel.
● Status saved: saved in the instrument status.
[ADC Dither
Auto Man]
● Menu description: to control opening/closing of ADC dither of the frequency acquisition circuit in the
analyzer. Under default mode, the signal/spectrum analyzer will automatically control whether the ADC
Dither is ON based on current working condition.
● Key path: 【 Meas Setup 】 , [More 1/2], [ADC Dither Auto Man] on the front panel.
● Status saved: saved in the instrument status.
● Factory preset: Auto OFF.
● Remote Command:
[:SENSe]:PSTatistic:ADC:DITHer[:STATe] OFF|ON|HIGH
[:SENSe]:PSTatistic:ADC:DITHer[:STATe]?
[:SENSe]:PSTatistic:ADC:DITHer:AUTO[:STATe] OFF|ON|0|1
[:SENSe]:PSTatistic:ADC:DITHer:AUTO[:STATe]?
[Meas Preset]
● Menu description: to reset the measurement parameters to the factory preset status or user saved
parameter status
● Key path:
【
Meas Setup
】
, [Meas Preset] on the front panel.
● Factory preset: factory reset.
●
Remote Command:
:CONFigure:PSTatistic