Ceyear 4051 Series, User Manual

Page: 462 / 751

5 Menu
5.2. Description of menu
448
● More description: to set the display method for the selected trace from [
Trace On
], [View],
[Background] and [Blank].
●
Key path: 【 Trace 】 , [View/Blank ▶ ] on the front panel.
●
Status saved: saved in the instrument status.
●
Factory preset: all trace display modes are defaulted as Refresh.
● Remote Command:
:trace:chpower:display[:state] ON|OFF|0|1
:trace:chpower:display[:state]?
:trace:chpower:update[:state] ON|OFF|0|1
:trace:chpower:update[:state]?
[Detector
▶
]
Pop up soft More related to setting the detector type for the currently selected trace, including [Auto],
[Normal], [Peak], [Sample], [Negative Peak], [Average
▶ ], where, the average detector type includes Log-Pwr
Avg, Log-Pwr Avg and Voltage Avg.
[Auto]
● Menu description: to set the detector command for the currently selected trace as Auto. That means, the
signal/spectrum analyzer will perform based on the parameter setting of currently selected trace.
● Key path : 【 Trace 】 , [More 1/2 ▶ ], [Detector ▶ ], [Auto] on the front panel
● Status saved: saved in the instrument status.
● Factory preset: the trace detector type is Power Average.
● Remote Command:
:chpower:detector:AUTO ON|OFF|1|0
:chpower:detector:AUTO?
[Normal]
● Menu description: to set the detector command for the currently selected trace as Normal. I.e., display
the measurement results of positive peak and negative peak at the same time to achieve display effect
similar to the analog instrument.
● Key path:
【
Trace
】
, [More 1/2
▶
], [Detector
▶
], [Normal] on the front panel.
● Status saved: saved in the instrument status.
●
Remote Command:
:chpower:detector normal
:chpower:detector?
[Peak]
● Menu description: to set the detector command for the currently selected trace as Positive Peak. I.e.,
take the maximum value from sampling data assigned to each trace point.