Ceyear 4051 Series, User Manual

Page: 54 / 751

3 Introduction to Use
3.3 Basic measurement methods
40
To display date and time information at the top right of the screen.
8) Test table
To display the test table in current measurement mode.
9) Soft key menu
To display the sot key menu of the last key pressed.
3.3.1.2 User interaction
The following interactions can be used for the instrument with no need for user operating interface of the
external keyboard.
 Screen keyboard;
 Knob;
 Arrow keys;
 Soft keys.
All tasks to be completed during operation of the instrument can be done via this user interface. All keys
correspond to external keyboard operations (such as arrow keys and Enter key) and comply with Microsoft
standards except for special keys for the instrument.
1) Keyboard
See 3.2.1.7 for details.
2) Knob
See 3.2.1.8 for details.
3) Arrow keys
See 3.2.1.8 for details.
4) Soft keys
See 3.2.1.5 for details.
3.3.1.3 Current window switch key
When users need to switch between several display windows, press the current window switch key at the
bottom of the front panel.
3.3.1.4. Input data
The following methods can be used to enter the data into relevant dialog:
 Use keys on the front panel, such as the keyboard, the knob or the navigation key;
 Use keys on the virtual keyboard on the front panel;
 Use external keyboard connected.
Characteristics of Windows dialogs: In some cases, for example, when you want to install a printer, you need
to use Windows built-in dialogs. The knob and the function keys do not work in such dialogs.
When entering numeric parameters into certain field, the keyboard can only be used to input numbers:
 Use the keyboard to enter parameters, or use the knob (small step) or up/down keys (large step) to change
parameter values currently used;
 After inputting numeric values with the keyboard, press the unit key corresponding to the soft key menu
to add relevant unit to the entered values;