manualshive.com logo in svg

Rohde & Schwarz ESRP Series, Руководство пользователя

Серия приборов Rohde & Schwarz ESRP - это высокоточные спектральные анализаторы, обеспечивающие точные измерения. Пользователи могут скачать руководство по использованию бесплатно с manualshive.com. Качественное руководство поможет освоить все функции прибора для эффективного использования.

Поделиться
Скачать
background image

Index

R&S

®

ESRP

1087

User Manual 1175.7445.02 ─ 08

Calibrate Reflection Short (remote control) .............. 870
Calibrate Transmission (remote control) ................... 870
Calibration frequency RF .......................................... 498
CCDF ................................................................ 200, 292
Center ....................................................................... 316
Center (remote control) .............................................790
CF Stepsize .............................................................. 316
Ch Power ACLR ............................................... 199, 212
Channel Bandwidth ...........................................227, 434
Clear all messages ................................................... 496
Clear Write ........................................................ 147, 360
Close Sweep List .............................................. 238, 268
Color (On/Off) ................................................... 492, 494
Colors ....................................................................... 492
Compatibility mode ................................................... 485
Computer name ........................................................ 483
Configure monitor ..................................................... 489
Cont Demod ..............................................................391
Continue Single Sweep ............................................ 341
Continuous Sweep ....................................................341
Copy to ..................................................................... 187
Coupling (FSx/HP) .................................................... 488
CP, ACP, MC-ACLR (remote control) ........................692
CP/ACLR Standard (remote control) ........................ 696
Decim Sep (remote control) ...................................... 818
Default Colors 1 (remote control) .............................. 945
Default Colors 2 (remote control) .............................. 945
Delete ....................................................................... 188
Delete (ACLR User Standard) .................................. 221
Delete Value ..............................................................187
Density (remote control) ........................... 852, 853, 854
Description ................................................................ 485
Deselect all ............................................................... 186
Details On/Off ........................................................... 269
DHCP (On/Off) .......................................................... 484
Display Line 1 ........................................................... 188
Display Line 2 ........................................................... 188
Display lines ..............................................................188
Display pwr save .......................................................494
Display Pwr Save (remote control) ........................... 947
Display setup ............................................................ 490
Display update (On/Off) ............................................ 488
Edit ............................................................................187
Edit (remote control) ................................. 680, 681, 682
Edit Comment ........................................................... 186
Edit Margin ................................................................187
Edit Name ................................................................. 186
Edit Value .................................................................. 187
Exclude LO ............................................................... 383
Export (remote control) ............................................. 916
FFT ........................................................... 330, 334, 342
FFT Filter Mode ........................................ 330, 335, 343
Firmware update ....................................................... 496
FM .............................................................................391
Frequency Line 1 ...................................................... 189
Frequency Line 2 ...................................................... 189
Frequency Offset (remote control) ............................ 792
Full Span ...................................................................156
Gate Delay ................................................................ 350
Gate Length .............................................................. 351
Gate Mode Lvl/Edge ................................................. 350
Gate Settings ............................................................ 350
Gated Trigger ............................................................ 349
General setup ........................................................... 483
GPIB ......................................................................... 485
GPIB address ........................................................... 485
GPIB language ......................................................... 486

GPIB terminator LFEOI/EOI ..................................... 489
Handle missing Ext. ref ............................................. 478
Hardware info ........................................................... 495
Harmonic Distortion ...........................................201, 311
Harmonic RBW Auto .................................................312
Harmonic Sweep Time ..............................................312
I/O logging (On/Off) ...................................................489
ID string factory .........................................................485
ID string user ............................................................ 485
IF gain (Norm/Puls) ...................................................487
IF Power ........................................................... 347, 442
IF Power Retrigger Holdoff (remote control) ............. 805
IF Power Retrigger Hysteresis (remote control) ....... 805
Import (remote control) ............................................. 857
Info (LXI) ................................................................... 484
Input (AC/DC) ................................... 163, 326, 355, 439
Input (AC/DC)(remote control) .................................. 641
Input 50 Ω/75 Ω  ....................................... 160, 326, 439
Input source .............................................................. 498
Insert Value ............................................................... 187
Install option ..............................................................497
Install option by XML ................................................ 497
IP address .................................................................484
IQ Export ...................................................................505
IQ Import ................................................................... 505
LAN reset .................................................................. 485
Left Limit ................................................................... 273
Limits On/Off ............................................................. 272
List Evaluation .......................................................... 268
List Evaluation On/Off ............................................... 269
Load (ACLR User Standard) .....................................221
Log ............................................................................ 364
Logo (On/Off) ............................................................ 491
Logo On/Off (remote control) .................................... 947
LXI ............................................................................ 484
Margin ....................................................................... 269
Marker 1 to 4 (remote control) .................................. 664
Marker Demod .......................................................... 391
Marker Number ......................................................... 395
Marker Number (remote control) .............................. 847
Marker Peak List ....................................................... 393
Marker to Trace .........................................................178
Marker to Trace (remote control) .............................. 664
Marker Zoom ............................................................ 379
Max Hold ...........................................................147, 361
Max Peak Count ....................................................... 393
May Peak Size (remote control) ............................... 849
Mean ......................................................................... 272
Meas Start/Stop ........................................................ 270
Mech Atten Auto (remote control) ............................. 814
Min Hold ............................................................148, 361
Mkr Demod On/Off .................................................... 391
Mkr Stop Time ...........................................................391
Mode default ............................................................. 486
Mode R&S FSP ........................................................ 486
Mode R&S FSU ........................................................ 486
Network address ....................................................... 483
New ...........................................................................186
New (remote control) ................................ 680, 681, 682
New Spectrum (remote control) ................................ 604
No. of Harmonics ...................................................... 312
Normalize (remote control) ....................................... 870
OBW ................................................................. 199, 230
OBW (remote control) ............................................... 692
Option licenses ......................................................... 496
Other LAN settings ................................................... 483
Password .......................................................... 484, 499

Содержание ESRP Series







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ESRP Series

Bartscher 700 Series Instructions For Installation, Use And Maintenance Manual preview
700 Series
Бренд: Bartscher Страницы: 22
Ecco 3800 Series Assembly, Installation And Operation Instructions preview
3800 Series
Бренд: Ecco Страницы: 9
Talet Equipment 3000 Series Parts & Operators Manual preview
3000 Series
Бренд: Talet Equipment Страницы: 17
Datavideo HS-600 Instruction Manual preview
HS-600
Бренд: Datavideo Страницы: 50
Waterous Eclipse Installation, Operation And Maintenance Manual preview
Eclipse
Бренд: Waterous Страницы: 90
Campbell SC105 Product Manual preview
SC105
Бренд: Campbell Страницы: 14
Rain-Flo Irrigation 2470 Operating Manual preview
2470
Бренд: Rain-Flo Irrigation Страницы: 20
3M Attest Auto-reader 390 Connectivity Technical Specifications preview
Attest Auto-reader 390
Бренд: 3M Страницы: 2
3M Attest 390 Quick Reference Manual preview
Attest 390
Бренд: 3M Страницы: 2
3M Ranger 245 Competency Checklist preview
Ranger 245
Бренд: 3M Страницы: 2
3M PELTOR WS LiteCom Plus Technical Data Sheet preview
PELTOR WS LiteCom Plus
Бренд: 3M Страницы: 7
3M Steri-Vac GS Series Site Planning & Installation Manual preview
Steri-Vac GS Series
Бренд: 3M Страницы: 52
Abbott CentriMag Quick Reference Manual preview
CentriMag
Бренд: Abbott Страницы: 2
Abbott FreeStyle Libre Software Update preview
FreeStyle Libre
Бренд: Abbott Страницы: 3
abc PHASER Operation And Maintenance Manual preview
PHASER
Бренд: abc Страницы: 8
A.MENARINI GlucoMen Areo Quick Manual preview
GlucoMen Areo
Бренд: A.MENARINI Страницы: 2
Danelec DM800 Installation Manual preview
DM800
Бренд: Danelec Страницы: 67
FarmTek Growers Supply 109722 Manual preview
Growers Supply 109722
Бренд: FarmTek Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды